D-Link DAP-3760 Quick Installation Manual page 10

Before installing the Ethernet cable with a waterproof RJ-45 connector,
it is recommended that the Cat-5 RJ-45 coaxial cable be used for the
bridge to power injector connections.
1. To connect to the hole labeled PoE+Data, open the black cover in
advance by using a coin or a slotted screwdriver and then screw
in the body of the gland and tighten.
2. Slide the sealing nut to the RJ-45 cable from its middle breach and
then insert the sealing into the cable.
3. Insert the RJ-45 connector and make sure that the locking tab
snaps home.
4. Screw the sealing on the gland and tighten.
D-Link DAP-3760
Connect Up
10