Related Manuals for Autarco S2.1P
Summary of Contents for Autarco S2.1P
- Page 1 Installation and Operation Manual Consumption meter IM-S2.1P-SMARTMETERI-EN-V1.0 Manual...
- Page 2 This manual is an integral part of the unit. Please read the manual carefully before installation, operation or maintenance. Keep this manual for future reference. Product information is subject to change without notice. All trademarks are recognized as the property of their respective owners. © Autarco Group B.V. All rights reserved.
-
Page 3: Table Of Contents
Table of Contents 1. Introduction 1.1 Read this first 1.2 Target Audience 1.3 Intended Application 2. Preparation 2.1 Safety instructions 3. Overview 3.1 Front Panel Display 3.2 LED Status Indicator Lights 4. Installation 4.1 Mounting the Consumption meter 4.2 Electrical Connections 4.3 Wiring 4.4 Monitoring 5. -
Page 4: Introduction
1.2 Target Audience This manual is intended for anyone who installs or maintains Autarco inverters in conjunction with a Consumption meter. Before any further action, the operators must first read all safety regulations and be aware of the potential danger to operate high-voltage devices. Operators must also have a complete understanding of this device’s features and functions. -
Page 5: Intended Application
Please contact your dealer to get the information of an authorized repair facility for any maintenance or repairmen. Any unauthorized actions including modification of product functionality of any form will affect the validation of warranty service; Autarco may deny the obligation of warranty service accordingly. -
Page 6: Overview
3. Overview 3.1 Front Panel Display Figure 3.1: Front display 3.2 LED Status Indicator Lights There are four LED status indicator lights at the front panel of the consumption meter, as shown in figure 3.1. Light Status Description GREEN Device is on FLASHING Device id off FLASHING... -
Page 7: Installation
4. Installation 4.1 Mounting the Consumption meter The consumption meter needs to be installed in the meter cupboard and can be installed on a 35mm DIN 35 rail. 4.2 Electrical Connections... -
Page 8: Wiring
4.3 Wiring Use port 1 and 4 to supply power to the S2.1P-SMARTMETER. Connect the meter with the supplied RS485 cable to the meter port of the inverter. You can only use the RJ45 port for connecting the consumption meter to the inverter. -
Page 9: Monitoring
4.4 Monitoring In order to get consumption data a WIFI-STICK-D needs to be used, and settings on the inverter need to be changed. Use the up and down buttons on the inverter to navigate the menu. ● Go to Advanced settings ●... -
Page 10: Specifications
5. Specifications Model name S2.1P-SMARTMETER Grid Topology 1P+N Rated Voltage 220V/230V Input Current 40mA (External CT: 120A:40mA) Accuracy Voltage ±0.2% Current ±0.5% Power (P,Q,S) ±0.5% Active Energy ±0.5% Reactive Energy ±1% Operating Temperature -10°C - 55°C Relative Humidity <95% (Non-condensing)
Need help?
Do you have a question about the S2.1P and is the answer not in the manual?
Questions and answers