Download Print this page
Mainstays MSW-10001 Manual

Mainstays MSW-10001 Manual

Media fireplace with 4 shelves-black

Advertisement

Available languages

Available languages

Quick Links

Media Fireplace with 4 shelves-Black
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our customer service number and have your instructions
and parts list ready to provide the model name, part name or factory number:
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
Stock # MSW-10001
ADULT ASSEMBLY REQUIRED
www.whalenstyle.com
Or e-mail your request to parts@whalenfurniture.com
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2019-06-03
866-942-5362
Rev. 0001-A
LOT NUMBER:
DATE PURCHASED:
/
/

Advertisement

loading
Need help?

Need help?

Do you have a question about the MSW-10001 and is the answer not in the manual?

Questions and answers

Summary of Contents for Mainstays MSW-10001

  • Page 1 LOT NUMBER: DATE PURCHASED: Media Fireplace with 4 shelves-Black Stock # MSW-10001 ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our customer service number and have your instructions...
  • Page 2 M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Media Fireplace with 4 shelves-Black MODEL # MSW-10001 MADE IN CHINA FITS UP TO MOST 165.1 cm / 65”...
  • Page 3 Important Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and non- abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manual. NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED OFF WITH DAMP CLOTH.
  • Page 4 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- Left Top Panel (Qty. 1) B- Middle Top Panel (Qty. 1) C- Right Top Panel (Qty. 1) D- Middle Top Front Stretcher E- Side Top Stretcher F- Side Frame...
  • Page 5 Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. (1) Cam Lock (2) Cam Bolt (3) M8 x 30 mm Wood Dowel (Qty. 46+2 extra) (Qty. 46+2 extra) (Qty.
  • Page 6 Assembly Instructions ② x 26 1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty carton to avoid any scratch. 2. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panels (A, B and C) and Side Frames (F) using a Phillips screwdriver.
  • Page 7 Assembly Instructions ② x 20 3. Securely screw the Cam Bolts (2) into the designated small holes on the Partition Panels (G and I), Middle Posts (H and J) and Middle Bottom Stretchers (L and M) using a Phillips screwdriver.
  • Page 8 Assembly Instructions ③ x 8 4. Glue eight 30 mm Wood Dowels (3) into side holes of Side Bottom Panels (N).
  • Page 9 Right Side Assembling ③ x 2 5. Glue two 30 mm Wood Dowels (3) into side holes of Right Partition Panel (I).
  • Page 10 Right Side Assembling ① x 3 6. Align and attach the Right Middle Post (J) to the Right Partition Panel (I) by engaging three Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement).
  • Page 11 Right Side Assembling ① x 2 7. Attach one Side Bottom Panel (N) to one Side Frame (F) by engaging two Cam Locks (1).
  • Page 12 Right Side Assembling ① x 2 8. Attach two Side Top Stretchers (E) to the Side Frame (F) by engaging two Cam Locks (1).
  • Page 13 Right Side Assembling ① x 4 9. Attach the Right Partition Panel (I) to the Side Top Stretchers (E) and Bottom Panel (N) by engaging four Cam Locks (1).
  • Page 14 Right Side Assembling ③ x 6 10. Glue six 30 mm Wood Dowels (3) into top holes of the previous assembly.
  • Page 15 Right Side Assembling ① x 8 11. Position the Right Top Panel (C) onto the inserted Wood Dowels (3) and fasten it in place by engaging the Cam Locks (1).
  • Page 16 Left Side Assembling ③ x 2 12. Glue two 30 mm Wood Dowels (3) into side holes of Left Partition Panel (G).
  • Page 17 Left Side Assembling ① x 3 13. Attach the Left Middle Post (H) to the Left Partition Panel (G) by engaging three Cam Locks (1).
  • Page 18 Left Side Assembling ① x 2 14. Attach the remaining Side Bottom Panel (N) to the other Side Frame (F) by engaging two Cam Locks (1).
  • Page 19 Left Side Assembling ① x 2 15. Attach the remaining Side Top Stretchers (E) to the other Side Frame (F) by engaging two Cam Locks (1).
  • Page 20 Left Side Assembling ① x 4 16. Attach the Left Partition Panel (G) to the Side Top Stretchers (E) and Bottom Panel (N) by engaging four Cam Locks (1).
  • Page 21 Left Side Assembling ③ x 6 17. Glue six 30 mm Wood Dowels (3) into top holes of the previous assembly.
  • Page 22 Left Side Assembling ① x 8 18. Position the Left Top Panel (A) onto the inserted Wood Dowels (3) and fasten it in place by engaging the Cam Locks (1).
  • Page 23 Middle Assembling ③ x 10 19. Glue the 30 mm Wood Dowels (3) into side holes of the Middle Stretchers (D, M and L) and Middle Bottom Panel (K).
  • Page 24 Middle Assembling ④ x 5 ⑥ x 2 20. Attach the Middle Top Back Stretcher (P) to the Middle Top Panel (B) with two 20 mm Wood Dowels (6) and five 25 mm Screws (4).
  • Page 25 Middle Assembling ④ x 6 ⑥ x 4 21. Attach the Middle Top Side Stretchers (Q) to the Middle Top Panel (B) with four 20 mm Wood Dowels (6) and six 25 mm Screws (4).
  • Page 26 Middle Assembling ① x 2 22. Attach the Middle Top Front Stretcher (D) to the Top Panel (B) by engaging two Cam Locks (1).
  • Page 27 Assembly Instructions ① x 1 23. Attach the previous assembly to the Left Middle Post (H) by engaging one Cam Lock (1).
  • Page 28 Assembly Instructions ④ x 5 24. Fasten the Middle Top Stretchers (P and Q) to the Left Top Panel (A) with five 25 mm Screws (4).
  • Page 29 Assembly Instructions ① x 4 25. Attach the Middle Bottom Panel (K) between the Middle Bottom Stretchers (L and M) by engaging four Cam Locks (1).
  • Page 30 Assembly Instructions ⑦ x 4 ⑧ x 4 26. Fasten four Plastic Connectors (8) to the Middle Bottom Panel (K) with four 1/2" Bolts (7).
  • Page 31 Assembly Instructions ⑦ x 2 27. Fasten the Middle Bottom Panel (K) to the Left Partition Panel (G) with two 1/2" Bolts (7).
  • Page 32 Assembly Instructions ① x 1 ⑦ x 2 28. Repeat the same procedure to attach the Right Side Assembly at the opposite end.
  • Page 33 Assembly Instructions ④ x 5 29. Fasten the Middle Top Stretchers (P and Q) to the Right Top Panel (C) with five 25 mm Screws (4).
  • Page 34 Assembly Instructions 30. Unpack the fireplace insert from the inner box and follow the instructions to install the Top Trim and Side Trims to the fireplace insert. 31. Ask for assistance to stand the assembled unit upright. 32. Lift the fireplace insert carefully into the back of the assembled mantel and center it in the opening. DO NOT drag the insert across the Middle Bottom Panel (K) as it may scratch the unit.
  • Page 35 Assembly Instructions ⑤ ⑨ 34. Plug the Cam Lock Covers (9) onto the visible Cams Locks to conceal the Cams. 35. Insert the Shelf Supports (5) into the desired holes in the sides of the compartment. Make sure you place the four Shelf Supports in the same level so the shelf is not tilted.
  • Page 36 Assembly Instructions NOTE: To prevent your TV from tipping, you must follow these instructions if you place a TV on top of your console. Otherwise, skip to “Step 37”. 36. Remove the paper backing from the Stop Rails (R), then properly align the Stop Rail with the top edge of the stopper template on Top Panels (A, B and C).
  • Page 37 Assembly Instructions Tools required (not provided): Phillips screwdriver, stud finder, power drill and 3 mm/0.1 in drill bit. 38. Ask for assistance to position the assemble fireplace at the desired location against a wall. If necessary, adjust the pre-attached Floor Levelers at the bottom of the unit to level the unit. Now, follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to attach the tip-over restraints to the unit and the wall.
  • Page 38: Care And Maintenance

    Care and Maintenance  Use a soft, clean cloth that will not scratch the surface when dusting.  Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.  Using solvents of any kind on your furniture may damage your furniture’s finish. ...
  • Page 39 NÚMERO DEL LOTE: FECHA DE COMPRA Chimenea con 4 repisas-color negro Serie # MSW-10001 ENSAMBLE REQUERIDO POR ADULTOS Si tiene alguna pregunta relacionada con el montaje o si faltan piezas, NO devuelva este producto al establecimiento donde lo adquirió. Por favor llame a nuestro número de servicio al cliente y tienen sus instrucciones y lista de piezas listo para proporcionar el nombre del modelo, el nombre o el número de parte de la fábrica:...
  • Page 40 M Á X I M O P E S O R E C O M E N D A D O FABRICANTE: Whalen Furniture Manufacturing CATALOGO: Chimenea con 4 repisas-color negro MODELO # MSW-10001 HECHO EN CHINA PARA LA MAYORIA TV’S DE HASTA 165.1 cm / 65”...
  • Page 41 IMPORTANTE Antes de comenzar: Abra, identifique y cuente todas las partes antes del ensamble. Coloque las piezas sobre una superficie plana y no abrasiva. Tendrá que las partes identificadas en la página 4 y 5 de este manual de instrucciones. NOTA: ES MUY IMPORTANTE PARA EL USO DE GOMA CON LOS PERNSO DE MADERA.
  • Page 42 Lista de partes y material de ferretería Le rogamos que lea completamente las instrucciones y verifique que todas las piezas y herramientas indicadas se encuentran presentes antes del comienzo del montaje. A- Panel izquierdo superior (Cant. 1) B- Panel medio superior (Cant. 1) C- Panel derecho superior (Cant.
  • Page 43 Lista de partes y material de ferretería Le rogamos que lea completamente las instrucciones y verifique que todas las piezas y herramientas indicadas se encuentran presentes antes del comienzo del montaje. (1) Tuerca de fijación (2) Perno de fijación (3) Clavija de madera de M8 x 30 mm (Cant.
  • Page 44 Instructivo de ensamble ② x 26 1. Desempacar la unidad y confirmar que se tiene todo el material de ferretería y partes requeridas. Ensamblar la unidad en un piso alfombrado o en el cartón vacío para evitar rasguños. 2. Atornillar los pernos de fijación (2) en los agujeros chicos designados sobre los paneles superiores (A, B y C) y los marcos laterales (F) usando un desarmador estrella.
  • Page 45 Instructivo de ensamble ② x 20 3. Atornillar los pernos de fijación (2) en los agujeros chicos designados en los paneles divisores (G e I), en los postes medios (H y J) y en los soportes medios inferiores (L y M) usando el desarmador estrella.
  • Page 46 Instructivo de ensamble ③ x 8 4. Pegar 8 clavijas de madera de 30 mm (3) en los agujeros laterales de los paneles laterales inferiores (N).
  • Page 47 Ensamble del lado derecho ③ x 2 5. Colocar 2 clavijas de madera de 30 mm (3) en los agujeros laterales del panel divisor derecho (I).
  • Page 48 Ensamble del lado derecho ① x 3 6. Alinear y adjuntar el poste derecho medio (J) al panel divisor derecho (I) empleando 3 tuercas de fijación (1) (Consulte la página 3 del sistema de tuerca de fijación).
  • Page 49 Ensamble del lado derecho ① x 2 7. Adjuntar un panel lateral inferior (N) a un marco lateral (F) empleando 2 tuercas de fijación (1).
  • Page 50 Ensamble del lado derecho ① x 2 8. Adjuntar 2 soportes laterales superiores (E) al marco lateral (F) empleando 2 tuercas de fijación (1).
  • Page 51 Ensamble del lado derecho ① x 4 9. Adjuntar el panel derecho divisor (I) al soporte lateral superior (E) y al panel inferior (N) empleando 4 tuerca de fijación (1).
  • Page 52 Ensamble del lado derecho ③ x 6 10. Pegar 6 clavijas de madera de 30 mm (3) en los agujeros superiores del ensamble previo.
  • Page 53 Ensamble del lado derecho ① x 8 11. Posicionar el panel derecho superior (C) sobre las clavijas de madera insertadas (3) y sujetar en su lugar empleando tuercas de fijación (1).
  • Page 54 Ensamble del lado izquierdo ③ x 2 12. Colocar 2 clavijas de madera de 30 mm (3) en los agujeros laterales del panel divisor izquierdo (G).
  • Page 55 Ensamble del lado izquierdo ① x 3 13. Adjuntar el poste izquierdo medio (H) al panel izquierdo divisor (G) empleando 3 tuercas de fijación (1).
  • Page 56 Ensamble del lado izquierdo ① x 2 14. Adjuntar el panel lateral inferior restante (N) al otro marco lateral (F) empleando 2 tuercas de fijación (1).
  • Page 57 Ensamble del lado izquierdo ① x 2 15. Adjuntar el soporte lateral superior restante (E) al otro marco lateral (F) empleando 2 tuercas de fijación (1).
  • Page 58 Ensamble del lado izquierdo ① x 4 16. Adjuntar el panel divisor izquierdo (G) a los soportes laterales superiores (E) y al panel inferior (N) empleando 4 tuercas de fijación (1).
  • Page 59 Ensamble del lado izquierdo ③ x 6 17. Pegar 6 clavijas de madera de 30 mm (3) en los agujeros superiores del ensamble previo.
  • Page 60 Ensamble del lado izquierdo ① x 8 18. Posicionar el panel izquierdo superior (A) sobre las clavijas de madera insertadas (3) y sujetar en su lugar empleando las tuercas de fijación (1).
  • Page 61 Ensamble del medio ③ x 10 19. Pegar las clavijas de madera de 30 mm (3) en los agujeros laterales de los soportes medios (D, M y L) y del panel medio inferior (K).
  • Page 62 Ensamble del medio ④ x 5 ⑥ x 2 20. Adjuntar el soporte medio superior posterior (P) al panel medio superior (B) con 2 clavijas de madera de 20 mm (6) y 5 pernos de 25 mm (4).
  • Page 63 Ensamble del medio ④ x 6 ⑥ x 4 21. Adjuntar los soportes medios superiores laterales (Q) al panel medio superior (B) con 4 clavijas de madera de 20 mm (6) y 6 pernos de 25 mm (4).
  • Page 64 Ensamble del medio ① x 2 22. Adjuntar el soporte medio superior frontal (D) al panel superior (B) empleando 2 tuercas de fijación (1).
  • Page 65 Instructivo de ensamble ① x 1 23. Adjuntar el ensamble previo al poste izquierdo medio (H) empleando una tuerca de fijación (1).
  • Page 66 Instructivo de ensamble ④ x 5 24. Sujetar los soportes medios superiores (P y Q) al panel izquierdo (A) con 5 pernos de 25 mm (4).
  • Page 67 Instructivo de ensamble ① x 4 25. Adjuntar el panel medio inferior (K) entre los soportes medios inferiores (L y M) empleando 4 tuercas de fijación (1).
  • Page 68 Instructivo de ensamble ⑦ x 4 ⑧ x 4 26. Sujetar 4 conectadores de plástico (8) al panel medio inferior (K) con 4 pernos de 1/2" (7).
  • Page 69 Instructivo de ensamble ⑦ x 2 27. Sujetar el panel medio inferior (K) al panel divisor izquierdo (G) con 2 pernos de 1/2" (7).
  • Page 70 Instructivo de ensamble ① x 1 ⑦ x 2 28. Repetir el mismo procedimiento para adjuntar el ensamble lateral derecho al lado opuesto.
  • Page 71 Instructivo de ensamble ④ x 5 29. Sujetar los soportes medios superiores (P y Q) al panel derecho superior (C) con 5 pernos de 25 mm (4).
  • Page 72 Instructivo de ensamble 30. Desempacar el inserto de chimenea de la caja interior y seguir las instrucciones para instalar los bordes superior y laterales al inserto de chimenea. 31. Pedir asistencia para poner la unidad ensamblada en posición vertical. 32. Poner el inserto de chimenea en la parte posterior del mantel ensamblado y centrar en la apertura. arrastre el inserto a través de el panel inferior (F) porque puede rayar la unidad.
  • Page 73 Instructivo de ensamble ⑤ ⑨ 34. Inserte las tapas de las tuercas de fijación (9) en las tuercas de fijación visibles para ocultarlos. 35. Coloque los soportes de la estantería (5) en los orificios de los compartimentos de su elección. Asegúrese de que coloca los cuatro soportes al mismo nivel para que la estantería no quede inclinada.
  • Page 74 Instructivo de ensamble NOTA: Para evitar que su televisor su vuelque, se debe seguir estas instrucciones cuando se ubique su televisor en el mueble. Delo contrario, vaya al paso 37. 36. Retirar el respaldo de papel del riel tope (R), luego alinear el riel tope con el borde superior del templete del tope en el panel superior (A, B y C).
  • Page 75 Instructivo de ensamble Herramientas necesarias (no incluidas): Desarmador estrella, detector de vigas, taladro eléctrico y taladro de 3mm (0.1"). 38. Pida assistencia para posicionar la chimenea ensamblada en el lugar deseado contra la pared. Si fuera necessario, ajuste los niveladores de piso pre-adjuntados en la parte inferior de la base para nivelar la unidad.
  • Page 76: Mantenimiento Y Cuidados

    Mantenimiento y Cuidados  Use una toalla suave y limpia para evitar daños y rayaduras.  Uso de cera para pulir muebles no es necesario. Si desea usar cera, pruebela en un área que no sea visible para revisar su funcionamiento. ...