Rycom SnapTRACK Programming Quick Manual

PROGRAMMING QUICK GUIDE
r P
e c e I v e r r o g r a m m I n g
With the unit on, press and hold the P
at the top of the LCD.
To scroll through the main menu headings, press the F
To enter a selection's sub-menu press the U
T browse a selection's menu, press the F
o
In the sub-menu, once the desired option is selected, exiting the sub-menu after toggling to the desired
setting, will save the selection. To select a desired mode or frequency hold the F
2 seconds to select the desired option.
To exit a selection's sub-menu use the d
Once in the main menu, exit the programming by pressing the P
operation mode.
I
n t e r fa c e
o button for 4 seconds. Once released "Pro"' will be displayed
ower n
requency
A (G u
P rrow Ain
.
requency
A (G d
own rrow Ain
P
r o g r a m
Vol
Light
Units
Orient
Curnt
Vibrtn
P-Link
batt
OpMode
Sonde
Line
.
) key.
P
) button.
own
o button. This returns to the normal
ower n
m I
e n u t e m s
Select volume setting; low, medium high
& mute
Turn on or off backlight
Select metric or imperial measurement
Turn on or off line orientation indication
Turn on or off constant current measurement
Turn on or off haptic feedback
Turn on or off PathLINK transmitter radio link
Select battery profile; li-ion or alkaline
Select locate modes for use during normal
operation; Peak, pinpoint peak, null, & sonde
Select available sonde frequencies for use
during normal operation
Select available line locate frequencies for use
during normal operation
3
watt
/M K for
requency ode ey