Advertisement
2. Attach the base poles to the frame.
3. Find the hole in the frame, remove the rubber caps of the base poles at this side and slide the
cross rod on the base poles. Make sure that the hole in the cross rod points outwards. Re-mount
the rubber caps on the base poles.
4. Attach the base tube with screws and nuts. Also use the washers.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62835–62839
Page 8
10
2021-1
Advertisement
