Advertisement
Quick Links
Operation Manual
Fitness Trampoline
62835–62839
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Summary of Contents for WilTec 62835
- Page 1 Operation Manual Fitness Trampoline 62835–62839 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Store the packaging parts (foils, plastic bags, etc.) in places that are not accessible to children, especially infants, as packaging parts often harbour unrecognisable dangers (e. g., risk of suf- focation). © by WilTec Wildanger Technik GmbH Item 62835–62839 Page 3 http://www.WilTec.de...
- Page 4 Name Qty. Name Qty. Frame Spanner Cover Base tube Handle bar (centre) Handle bar (lateral) Knurled screw Support rod (left) Screw and nut Support rod (right) © by WilTec Wildanger Technik GmbH Item 62835–62839 Page 4 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 5 4. Stretch open the cover. 5. Assemble the feet. 6. Assemble the lateral support. 7. Fix the lateral support with the screws. 8. Attach the middle section to the handle bar. © by WilTec Wildanger Technik GmbH Item 62835–62839 Page 5 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 6 9. Insert the handle bar into the opening of the support bar. 10. Secure the connection using the knurled screws. Important! Before use, check all connections (screws, nuts) for tightness! © by WilTec Wildanger Technik GmbH Item 62835–62839 Page 6 http://www.WilTec.de http://www.aoyue.eu...
- Page 7 Hexagon socket head screw Knurled screw Base poles Washer Handle Spanner Base tube 1 Screw and nut Cross rod Assembly 1. Unfolding the frame/the jumping mat © by WilTec Wildanger Technik GmbH Item 62835–62839 Page 7 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 8 Make sure that the hole in the cross rod points outwards. Re-mount the rubber caps on the base poles. 4. Attach the base tube with screws and nuts. Also use the washers. © by WilTec Wildanger Technik GmbH Item 62835–62839 Page 8 http://www.WilTec.de...
- Page 9 5. Insert the second part of the base tube and fix it with the knurled screw. 6. Mount the handle and fix it with the short screw. © by WilTec Wildanger Technik GmbH Item 62835–62839 Page 9 http://www.WilTec.de http://www.aoyue.eu 2021-1...
- Page 10 Weight (㎏) Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 62835–62839 Page 10 http://www.WilTec.de...