Starting The Memory; Programmes; Setting A Programme - Bosch BFL554MS0B Instruction Manual

Programmes

en
Saving a new setting in the memory: press the
■
button. The old settings appear. Save the new
i
programme as described in steps 1-4.

Starting the memory

It is very easy to start the saved programme. Place your
meal into the appliance. Close the appliance door.
Press the button.
i
1.
The saved settings are displayed.
Press the "Start" button.
2.
The cooking time counts down in the display.
The cooking time has elapsed
A signal sounds. Open the appliance door or press
Stop. The clock reappears.
Pausing the appliance
Touch the Stop button once or open the appliance
door. This pauses the appliance. The indicator above
the Stop button will light up.After closing the door, touch
the Start button again.
Cancelling
Press the "stop" button twice, or open the door and
press the "stop" button once.
12
PProgrammes
Y ou can prepare food really easily using the various
P r o g r a m m e s
programmes. You select a programme and enter the
weight of your food. The program then applies the most
suitable settings.
You can choose from 7 programmes.
Note:

Setting a programme

Once you have selected a programme, make settings
as follows:
Press the button repeatedly until the required
`
1.
programme number appears.
The indicator light above the button lights up.
Press the button.
h
2.
The indicator light above the button lights up and a
suggested value appears in the display.
Use the rotary selector to set the weight of the dish.
3.
Press the "Start" button.
4.
The cooking time for the programme starts counting
down.
The cooking time has elapsed
A signal sounds. Open the appliance door or press
Stop. The clock reappears.
Correction
Press the "stop" button twice and reset.
Pausing the appliance
Press the Stop button once or open the appliance door.
This pauses the appliance. The indicator above the
Stop button will light up.After closing the door, press the
Start button again.
Cancelling
Press the "stop" button twice, or open the door and
press the "stop" button once.