Related Manuals for Rave RMC-66P
Summary of Contents for Rave RMC-66P
- Page 1 Installation Manual RMC-66P 6 Zone 6 Source Audio Matrix Preamplifier WWW.RAVETECHNOLOGY.COM...
- Page 2 WWW.RAVETECHNOLOGY.COM...
-
Page 3: Package Content
INTRODUCTION The RMC-66P is a functional, easy-to-install, highly compatible, expandable, and user-friendly audio distribution system. The RMC-66P provides 6 Source inputs and 6 zones with stereo RCA preamp outputs. The RMC-66P combined with the optimal power amplifier creates a customized audio distribution system. -
Page 4: Product Features
PRODUCT FEATURES ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 POWER 1. POWER ON/OFF SWITCH 2. LED ZONE STATUS (Blue: Standby-White: ON-Blue/White: Mute) 1. PRE-AMP OUTPUTS 2. SOURCE INPUTS 3. 12V TRIGGER OUTPUTS 4. IR EMITTER OUTPUTS 5. - Page 5 Infrared receivers which allows control of source devices and the RMC-66P with the optional IR remote. The IR system can also send IR commands to the IR output jacks of the RMC-66P for control of your source components.
-
Page 6: Installation
INSTALLATION CONNECTIONS Connect audio sources to the stereo RCA (1-3), stereo 3.5mm (4-5) or optical (6) inputs. Connect the zone outputs (1-6) to the external amplifier or powered speakers. RMC-66P WWW.RAVETECHNOLOGY.COM... - Page 7 The RMC-66P has optional POE enabled keypads. This allows for source control from each specific zone as well as IR routing to the appropriate source devices once selected. The RMC-66K (Optional Accessory Kit) also comes with a hub that allows for all 6-keypads to be connected to the RMC-66P via Cat5e/6.
- Page 8 Expansion Port FRONT BACK IR EMITTERS There are 2 Infrared (IR) emitter outputs on the RMC-66P. These outputs are used to control the connected source components remotely through the RMC-66P keypad IR receiver. For example, connect the flasher to the IR output and receiver window of the connected source.
-
Page 9: Trigger Outputs
3. Connect the OUTPUT of SLAVE 1 to the INPUT of SLAVE 2. All source audio information - All RS232 control data - All MCU communication from the master and slave units will be shared through the expansion cable. Each RMC-66P unit must be connected to the network for APP control. -
Page 10: Lan Network Connection
LAN NETWORK CONNECTION There are 2 Ethernet ports on the rear panel of the RMC-66P for the connecting to the network and connecting additional RMC-66P or other network devices. Connect the RMC-66P network LAN port to the LAN port of the Wi-Fi Router. - Page 11 RMC-66P RS-232 CONTROL CODES (Baud Rate: 9600,8,N,1 , DB9 Connector Pin out, Tx, Rx, GND) 'CR':Carriage Return (0x0D) Not case sensitive Control Command Structure <xxPPuu'CR' Reply Control Command Structure >xxPPuu'CR' xx: Represent control command code 10 :All zones of host computer 1...
- Page 12 30 :All Zones of host computer 3 11 :Zone1 of host computer1 12 :Zone2 of host computer1 13 : Zone3 of host computer1 21 : Zone1 of host computer2 22 : Zone2 of host computer2 23 : Zone3 of host computer2 ....
- Page 13 BL:Balance Control CH:Source Control LS: The connection status of line control Reply command: >xxPPuu'CR' Enter1<********'CR' Change Source 1 display name;********It must be 8 effective ASCII code Enter2<********'CR' Change Source 2 display name Enter 3<********'CR' Change Source 3 display name Enter 4<********'CR' Change Source 4 display name Enter 5<********'CR' Change Source 5 display name Enter 6<********'CR' Change Source 6 display name Enter M<********'CR' Change display name of connect control when it starts...
- Page 14 EXAMPLES OF RS-232 COMMAND CODE All Zone ON <10PR01 Zone 1 ON <11PR01 All Zone OFF <10PR00 <21PR00 Salve 1 / Zone 1 OFF All Zone Mute ON <10MU01 <16MU01 Zone 6 Mute ON All Zone Mute OFF <10MU00 <35MU00 Salve 2 / Zone 5 Mute OFF All Zone Source 01 <10CH01...
- Page 15 INQUIRY COMMAND STRUCTURE Symbol Zone Master、Salve 1、Salve 2 1、2、3 Inquiry Master All Zone Status Inquiry Slave1 All Zone Status Inquiry Slave2 All Zone Status REPLY COMMAND >xxaabbccddeeffgghhiijj xx: Unit / Zone >1100000000200707100100 aa: PA IN Status bb: Power Status cc: Mute Status dd: DT Status ee: Volume Status ff: Treble Status...
- Page 16 Tel: 866-303-2629 contact@ravetechnology.com www.ravetechnology.com Warranty: Rave Technology products are warranted to be free from defects in workmanship and materials for a period of Five (5) years from the date of purchase without charge for parts or labor. This warranty does not apply to units that have...