Table of Contents
Advertisement
1.1.8
Onboard LEDs
1.
Q LEDs (BOOT_LED, VGA_LED, DRAM_LED, CPU_LED)
Q LEDs check key components (CPU, DRAM, VGA card, and booting devices) in
sequence during motherboard booting process. If an error is found, the corresponding
LED remains lit until the problem is solved. This user-friendly design provides an
intuitive way to locate the root problem within seconds.
The Q LEDs provide the most probable cause of an error code as a starting point for
troubleshooting. The actual cause may vary from case to case.
2.
Memory LED (Mem_LED)
The Mem_LED will light up and remain lit while the MemOK! II function is in use. When
the re-training is complete, the Mem_LED will turn off.
1-12
Chapter 1: Product Introduction
Hide quick links:
Advertisement
Table of Contents
