Using The Function Buttons During Playback - Panasonic Lumix DC-FZ1000M2 Owner's Manual

Using the function buttons during playback

You can directly set an assigned function to a selected image by pressing the function
button during playback.
Example: When [Fn6] is set to [Rating★3]
Press to select the picture
1
2 Press [Fn6] button, and then set the picture as
[Rating★3]
■
Functions that can be assigned in [Setting in PLAY mode]
• The following functions can be assigned to the button [Fn1], [Fn2], [Fn3], [Fn4], [Fn5],
[Fn6] or [Fn8].
*
1
• [Wi-Fi]: [Fn5]
• [LVF/Monitor Switch]: [Fn8]
• [Rec / Playback Switch]
• [4K PHOTO Play]
• [Delete Single]
*
1
Function button settings at the time of purchase.
*
2
No function is assigned to function buttons.
●
If you assign [4K PHOTO Play], a screen will be displayed, allowing you to select the pictures to
be extracted from a 4K burst file and saved.
●
To restore the default function button settings, select [Restore to Default].
57
Assigning frequently used functions to the buttons (Function buttons)
• [Protect]
*
1
• [Rating★1]
• [Rating★2]
• [Rating★3]: [Fn6]
• [Rating★4]
• [Rating★5]
• [RAW Processing]
• [4K PHOTO Bulk Saving]
*
*
1
2
• [Off]
[Fn1], [Fn2], [Fn3], [Fn4]
Basics
:
*
1