Front Dial/Rear Dial - Panasonic Lumix DC-FZ1000M2 Owner's Manual

Front Dial/Rear Dial

Rotating:
Selection of items or setting of values is performed during the
various settings.
Front Dial
Rear Dial
Allows you to set the aperture, shutter speed, and other settings when in [ ] / [
[ ] modes.
Mode dial
Temporarily changing the operation of the front/rear dials ([Dial Operation
Switch])
Preparations
Assign [Dial Operation Switch] to the function button
• [Dial Operation Switch] is assigned to [Fn5] at the time of purchase.
1 Press the function button
• A guide will be displayed showing the items temporarily assigned
to the front/rear dials.
• If no operations are performed, the guide will disappear in a few
seconds.
2 Rotate the front/rear dials while the guide is displayed
3 Press [MENU/SET] and set
• You can also complete this step by performing either of the
operations below:
– Press the shutter button halfway
●
You can set the items to be assigned temporarily to the front/rear dials in [Dial Operation Switch
Setup] in [Dial Set.] in the [Custom] ([Operation]) menu.
41
Front dial
Program Shift
Aperture value
Shutter speed
Aperture value
(→54)
Rear Dial
Program Shift
Aperture value
Shutter speed
Shutter speed
(→42)
Basics
Basic Operation
] / [ ] /