J. A. Roby ATHOS Owner's Manual page 4

1. Position the metal strips of the piece 1 inside the bottom notches of the piece 2 and flatten the 8
strips with a hammer.
2. Assemble the chimney in one piece and slide the hat on the conic part of the chimney and then
screw it into the 2 holes at the bottom of the hat. Lift up the 4 clips located in the hole of the top at 90
degrees. Place the chimney between these 4 clips and screw them on the chimney with 4 screws.
Advice:
Spray vegetable oil on the fireplace after each use in order to prevent corrosion. Take care to avoid
surrounding objects (patio, floor, etc) and paint the fireplace once a year
Foyer- fireplace (1)
Base (1)
Chapeau de cheminée – chimney hat (1)
Cheminée – chimney (1)
Pare vent – wind screens (2)
Tél.: (418) 849-8095 Fax.: (418) 849-0077 Internet.: www.jaroby.com
ASSEMBLY OF THE FIREPLACE
Liste des composantes – Components list
490, rue de L'Argon, Québec, (Qué.), G2N 2C9