Verification
The HP 70907A/B External Mixer Interface module (EMIM) does not have any module
specications. Operation of the EMIM in the system can be veried by using the system
master's operation verication software.
System-level performance specications for the EMIMs, including system specications that
are modied when an EMIM is added to a system, are in the Installation and Verication
Manual for the system master (for example, HP 70900B Local Oscillator). System-level
testing of systems controlled by an HP 70900 local oscillator can be accomplished in two ways:
Run the system operation-verication tests, using revision C.00.00 or greater. (For system
operation verication, refer to the Installation and Verication Manual for the system's
master.)
Run the HP 11990A system tests, using revision B.04.00 or greater. The HP 11990A
software and documentation are available through Hewlett-Packard Sales Oces.
System-level testing of systems controlled by other system masters can be accomplished by
using the system operation-verication tests given in the Installation and Verication Manual
for that system master. HP 11990 Series system tests can also be used, if they are available
for that system master.
4
Verification
4-1