Appliance Description; Technical Data; Intended Use - Levita HT 500 Operating And Maintenance Instructions Manual

APPLIANCE DESCRIPTION

See Fig. 1
1. Cover of the cutting blades
2. Cutting blades
3. Safety guard
4. Front handle with ON/OFF switch
5. Main handle with ON/OFF switch
6. Safety guard fastening screw
7. Cable with a plug

TECHNICAL DATA

Model
Voltage
Power input
No-load speed
Cutting thickness
Cutting length
Weight
Sound pressure level
Guaranteed sound power level
Vibration level – front handle
Vibration level – rear handle
Vibrations
The declared vibration emission values stated in the technical data and the declaration of conformity have been
measured in accordance with a standard test method provided by EN 60745 and may be used for comparing
one tool with another. The declared vibration can also be used in a preliminary assessment of exposure.
Warning! Vibration value during actual use of the power tool can differ from the declared value depending on
the way the tool is used. The vibration level may increase above the level stated.
When assessing vibration exposure to determine safety measures under Regulation 2002/44/EC to protect
persons regularly using power tools in employment, exposure to vibration should consider, the actual conditions
of use and the way the tool is used, including taking into account all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the start time.

INTENDED USE

The hedge trimmers are intended exclusively for cutting and alignment hedges, shrubs and ornamental shrubs,
for domestic use only. Any other use is explicitly prohibited.
The tool is intended for private home gardens, it is not suitable for use in public areas, parks and sports grounds,
along roads, on farms or in forestry.
EN
HT 500 HT 550
230-240 V~ 50 Hz
500 W 550 W
1750 1/min
16 mm
460 mm 520 mm
2.2 kg 2.4 kg
79 dB(A) K = 3 dB(A)
98 dB(A) 105 dB(A)
a = 2.785 m/s 2 K = 1.5 m/s
h
a = 3.298 m/s K = 1.5 m/s
2
h
13
Translation of the original instructions
2
2