Spectrum Industries 95513 Assembly Instructions

Assembly Instructions Assembly Instructions
Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt.
To report information regarding missing parts or damage, to purchase parts or
accessories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
(1) 060047
Sling side
(1) 060048
Sling base
(2) 0103894
54" Strap / buckle
assembly
(1) 0100193
2" x 2" x 1" shim
(3) 0103619
Adhesive bumper
1/2" x 1/16" thick
(1) 0166363
Leg bracket
1
Assemble and adjust CPU sling
1. Assemble the sling side and base using (2) 1/4-20 wing nuts as shown in Figure 1.1.
2. Thread the straps through the slots in sling side and base as shown in Figure 1.2
with the tails hanging down. (The center slot can be used for smaller CPU's.)
3. Thread each strap through the buckles as shown.
Center slot used
for smaller CPU's
Sling side
Figure 1.1
(2) 026547
1/4-20 x 1-1/2"
PHMS
(2) 021605
#10 x 1-3/4"
PHSM
(1) 042025
1/4-20 x 3/8" THMS
(2) 026057
#10 x 3/4" PHSM
(2) 026017
1/4-20 x 1/2" PHMS
(2) 034195
1/4-20 Wing nut
Strap / buckle
assembly
Wing nut
(2) required
Sling base
Adjustable CPU Sling Adjustable CPU Sling
95513 95513
(1) 044890
1" Nylon spacer
(1) 042139
Drill template
Strap / buckle
assembly
Figure 1.2
TM
1
/
"
8
(for desks without
threaded inserts)
0100192R6 Page 1 of 4