Advertisement
Quick Links
Specialist Deluxe Series II
FEATURES
• Marble top with powder coat body
• Glass doors
• Full width stainless steel front drawer
• 4 Castors (2 locking)
Gasmate
®
is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au
Important: Retain these instructions for future use.
03192 08/14
Storage Module
BQ8302
Aber – Hamilton, N.Z.
• Dimensions (L 800 x D 900 x
H 880mm)
• Freestanding unit
• Connects to right side of Specialist
Deluxe Series II BBQs
(see instructions page 9)
www.gasmate.co.nz
Advertisement
Related Manuals for Gasmate Specialist Deluxe II Series
Summary of Contents for Gasmate Specialist Deluxe II Series
- Page 1 • 4 Castors (2 locking) Deluxe Series II BBQs (see instructions page 9) Gasmate ® is a registered trademark of: Sitro Group Australia Pty Ltd www.gasmate.com.au Aber – Hamilton, N.Z. www.gasmate.co.nz Important: Retain these instructions for future use. 03192 08/14...
-
Page 2: Exploded Diagram
EXPLODED DIAGRAM... -
Page 3: Parts List
PARTS LIST 1. Base Panel Assembly 2. Castor with Lock 3. Castor No Lock 4. Right Door Assembly 2pcs 2pcs 5. Left Door Assembly 6. Cabinet Left Side 7. Back Panel 8. Cabinet Beam Panel Assembly 9. Magnet 10. Cabinet Right Side 11. - Page 4 ASSEMBLY INSTRUCTIONS Remove any transit protection material. Tools Required: Phillips Head Screwdriver & Adjustable Spanner. STEP 1 Use M6*12 screw(x16pcs) to fix swivel castor(with lock) x 2pcs and swivel castor (without lock) x 2pcs under the base panel. Note: Fit the locking Swivel castors at the rear of the base, so the locks can be accessed from the back of the Cart without the skirt panel being in the way.
- Page 5 STEP 3 Use M6*12 screw (x5pcs) to fix the back panel onto base panel, cabinet left side panel and cabinet right side panel. STEP 4 Use M4*10 screw (x4pcs) to fix the magnet to cabinet beam, then use M6*12 screw(x4pcs) to fix the beam between two cabinet side panels, as shown.
- Page 6 STEP 5 To fit the cabinet doors, insert the fixed upper pin into the bracket as shown in the picture, then insert the bottom pin into the base, and use M4 nut(x2pcs) to fasten the doors, as shown. STEP 6 Use M6*12 screw (x4pcs) to fasten the storage body assy to cabinet cart as shown.
- Page 7 CONNECTION WITH BBQ STEP 1 Loosen M4*10 screw (x1pc) and M6*12 screw (x4pcs) to remove the side shelf assembly. STEP 2 Use M6*15 screw (x4pcs) and M6 Nut (x4pcs) to connect the storage module to the right of the BBQ.
- Page 8 For any queries or assistance call Customer Service (Australia Only) 1300 174 876 Hours of operation: Monday to Friday 8.30am - 5.30pm EST Do not return to place of purchase. Keep your purchase receipt, this will be required to make any claims under the 12 month warranty.
Need help?
Do you have a question about the Specialist Deluxe II Series and is the answer not in the manual?
Questions and answers