• Use only as described in this manual. Use only manufacturer’s recommended attachments. • Do not use with damaged cord or plug. If vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center before using.
Ne pas modifier la fiche dans tous les cas. THeRMAL cUT OFF This vacuum cleaner has a special themostat that protects the cleaner in case of motor overheating. If the cleaner suddenly shuts off, push the on/off swith off (O) and unplug the cleaner. Check the cleaner for a possible source of oveheating such as full dust cup, a blocked hose or clogged filter.
Page 5
enGLiSH ASSeMBLY PAckeT The assembly pack is with the owner’s guide. The Packet contains three machine screws, one machine bolt and one nut to fasten the handle and bag assemblies to the cleaner. ASSeMBLY caution: Fully assemble the cleaner before using. Push down on handle release (#20) to move the handle assembly to the upright position.
9. Place lower side of belt into the belt guide and pull to stretch the belt around the left side of the motor pulley. 10. (With front of vacuum is facing you) Rotate the brush roll two times to center the belt and align it into the groove.
Page 8
Bloomington, IL 61701 If it is necessary to ship the cleaner outside your community to obtain warranty repair, you must pay the shipping charges to the Electrolux Authorized Warranty Station. Return shipping charges will be paid by the Warranty Station.
This manual is also suitable for:
El9025a - professional duralite vacuumEp9025a - prof duralite vac 5amp electro9020 series