Installation - Electrolux ICON Professional E32AR75JP Use And Care Manual

6

Installation

Required Tools
You will need the following tools:
This Use & Care Guide provides general installation
and operating instructions for your model. We
recommend using a service or kitchen contracting
professional to install your refrigerator. Use the
refrigerator only as instructed in this Use & Care
Guide. Before starting the refrigerator, follow
these important fi rst steps.
Location
• Choose a place that is near a grounded, non-
GFCI, electrical outlet. Do Not use an extension
cord or an adapter plug.
• If possible, place the refrigerator out of direct
sunlight and away from the range, dishwasher, or
other heat sources.
• The refrigerator must be installed on a fl oor that is
level and strong enough to support a fully loaded
refrigerator.
DO NOT install the refrigerator where the
temperature will drop below 40°F (13°C) or rise
above 110°F (43°C). The compressor will not be
able to maintain proper temperatures inside the
refrigerator.
DO NOT block the toe grille on the lower front
of your refrigerator. Suffi cient air circulation
is essential for the proper operation of your
refrigerator.
If your refrigerator is placed with the door hinge
against a wall, you may have to allow additional
space so the door can be opened wider.
Installation
• Allow the following clearances for ease of
installation, proper air circulation, and plumbing
and electrical connections:
Sides 3/8" inch (9.5 mm)
Top and Back 1 inch (25.4 mm)
• Allow for trim kit if it to be installed with the unit.
The refrigerator doors are designed to shut by
themselves within a 20 degree opening.
Refrigerator
3/8"
(10mm)