Gigabyte X470 AORUS GAMING 7 WIFI User Manual page 18

S
1 2 3
1 2 3
7) EC_TEMP1/EC_TEMP2 (Temperature Sensor Headers)
Connect the thermistor cables to the headers for temperature detection.
S
8) LED_CPU (CPU Cooler LED Strip/RGB LED Strip Header)
U
S
The header can be used to connect a CPU cooler LED strip or a standard 5050 RGB LED strip (12V/G/R/B),
with maximum power rating of 2A (12V) and maximum length of 2m.
S F
_
_
_
S _S
_
S _S
9) LED_C1/LED_C2 (RGB (RGBW) LED Strip Headers)
The headers can be used to connect a standard 5050 RGB (RGBW) LED strip (12V/G/R/B/W), with maximum
power rating of 2A (12V) and maximum length of 2m.
_
_
USB 0_ B
B_
USB 0_ B
1
1
EC_TEMP1 EC_TEMP2
U
_ _ 3
_ _ 3
1
_
RGB
LED Strip
1
12V
1 LED_C1
LED_C2
1
RGBW RGB
LED LED
Strip Strip
1
12V
For how to turn on/off the lights of the LED strip, refer to the instructions on in Chapter 2, "BIOS
Setup," "Peripherals." F_USB3
B_
Before installing the devices, be sure to turn off the devices and your computer. Unplug the power
cord from the power outlet to prevent damage to the devices.
F_USB3
S B_
S B_
B
_ S
S_
_ S
Pin No. Definition
S_
1 SENSOR IN
_
_ U
B
2 GND
_
_ U
_
B
F_USB3 F
F_USB3 F
Pin No. Definition
1 12V
2 G
3 R
_
_ _B
4 B
Connect the CPU cooler LED strip/RGB LED strip to the header. The _
_B
power pin (marked with a triangle on the plug) of the LED strip must be
connected to Pin 1 (12V) of the LED strip header. Incorrect connection
may lead to the damage of the LED strip.
Pin No. Definition
1 12V
S F_
2 G
3 R
S F_ 4 B
5 W
Connect one end of the RGB (RGBW) LED strip extension cable to the
header and the other end to your RGB (RGBW) LED strip. The black
wire (marked with a triangle on the plug) of the extension cable must
be connected to Pin 1 (12V) of this header. The 12V pin (marked with
an arrow) on the other end of the extension cable must be lined up with
the 12V of the LED strip. Be careful with the connection orientation of
the LED strip; incorrect connection may lead to the damage of the LED
strip. If you are connecting a RGBW LED strip (5-pin), combine the
two plugs of the extension cable together first. If you are connecting a
RGB LED strip (4-pin), use only the 4-pin plug of the extension cable.
F_USB30 3
F_USB30 3
- 18 -
B
_
B
B
F
F
_ 0
_ 0
_ F
_ F
_ 0 F
_ 0 F
_3 U
_3 U