Table of Contents
Advertisement
Quick Links
Heat Lamp for Restaurant
Includes 2 Clear, Infrared
250W/120V Bulbs
Item No.
Power Rate
EHL -2
500W (2 Bulb)
(250W each bulb)
BEFORE OPERATING ANY EQUIPMENT, READ AND FAMILIARIZE YOURSELF WITH THESE USE AND SAFETY INSTRUCTIONS
Congratulations on your purchase of this WINCO® commercial equipment. When used as intended and with proper
care and maintenance, you are sure to experience years of reliable operation from this equipment. To ensure best
results, it is important that you read and follow the instructions in this manual carefully. It is important to keep
these instructions in a safe place for future reference.
Professional Freestanding
Operating Instruction Manual
EHL-2
Voltage
Dimensions (H x W x D)
120V~60Hz
591mm x 35.6mm x 400mm
23.25" x 14.0" x 15.75"
Feature
Heavy duty
14Ga Aluminum;
6 ft. Long Cord
Advertisement
Table of Contents
Related Manuals for Winco EHL-2
Summary of Contents for Winco EHL-2
-
Page 1: Specifications
BEFORE OPERATING ANY EQUIPMENT, READ AND FAMILIARIZE YOURSELF WITH THESE USE AND SAFETY INSTRUCTIONS Congratulations on your purchase of this WINCO® commercial equipment. When used as intended and with proper care and maintenance, you are sure to experience years of reliable operation from this equipment. To ensure best results, it is important that you read and follow the instructions in this manual carefully. - Page 2 Introduction Congratulations on the purchase of your WINCO® countertop appliance. Please take time to carefully read through this manual to ensure the machine is operated and maintained properly, to ensure the best possible performance from the product for many years.
-
Page 3: Table Of Contents
• 2 clear, infrared bulbs - 500W (250W ea), 120V WINCO® prides itself on quality and service, ensuring that at the time of packing, all products are supplied fully functional and free of damage. Should you find any damage as result of freight, please contact your WINCO® dealer immediately. -
Page 4: Unpacking The Equipment
Unpacking the Equipment Installation Guidelines dIspose of All pAckAGING mAteRIAls IN AN These precautions should be followed at all times. Failure to follow eNvIRoNmeNtAlly RespoNsIble mANNeR. these precautions could result in injury to yourself and others. 1. Remove all packing materials and tape, as well as any protective to Reduce RIsk of INjuRy oR dAmAGe to the uNIt: plastic and cardboard, from the unit. -
Page 5: Safety Precautions
Safety Precautions WARNING electrical shock hazard. Keep water and other liquids from entering the inside of the unit. Liquid inside the unit could cause an CAUTION electrical shock. Do not spray water or cleaning products. Liquid could contact the electrical This equipment gets HOT. -
Page 6: Features
1. Set unit on a flat surface. 2. Install bulbs with the specified wattage rating as indicated on the warmer. 3. If unit fails to work properly when first operated, Call Winco customer service @ 1-888-946-2682 or 1-973-916-9958 Operation befoRe opeRAtING uNIt, eNsuRe thAt the uNIt Is oN A stuRdy, level suRfAce. -
Page 7: Troubleshooting
Troubleshooting If your WINCO® Heat Lamp does not operate, please check the following before placing a service call: Issue mIGht be cAused by RecommeNded solutIoN Unit is not plugged in Make sure unit is plugged in, and power cord is not... -
Page 8: Warranty
This warranty is not in force until such time as a properly completed SCAN THE QR CODE WITH YOUR MOBILE DEVICE and digitally signed Installation/Warranty Registration has been received by WINCO within 30 days from the date of installation. WARRANty seRvIce To initiate warranty service contact: support@wincous.com...
Need help?
Do you have a question about the EHL-2 and is the answer not in the manual?
Questions and answers