Electrolux ICON Designer E36EC75HSS Specifications page 2

Electric Slide-In Cooktop
E36EC75HSS
Optional 9" stainless
steel backsplash
1" min. recommended
distance between rear
edge of cutout and
nearest combustible
surface above countertop
25" min.
36" Electric Slide-In Cooktop Specifications
Product Weight – 68 Lbs.
•
Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz AC
•
only electrical supply with ground required on separate circuit fused on
both sides of line.
Connected Load (kW Rating) @ 240 / 208 Volts = 11.8 / 8.8 kW
•
Amps @ 240 / 208 Volts = 49.2 / 42.6 Amps
•
Always consult local and national electric codes.
•
Respect critical dimensions as noted for proper installation of cooktop.
•
Allow 2" space below armored cable opening to clear electrical cable and
•
allow space for installation of junction box on wall at back of cooktop.
Overhead cabinetry should not exceed a 13" maximum depth.
•
Allow 30" minimum clearance between top of cooktop and bottom of
•
unprotected wood or metal overhead cabinetry.
Absolute minimum horizontal distance between overhead cabinets
•
installed to either side of appliance must be no less than maximum
width of appliance.
Allow 24" minimum clearance when bottom of wood or metal overhead
•
cabinet is protected by not less than 1/8" flame-retardant millboard
covered with not less than No. 28 MGS sheet steel, 0.015" stainless
steel, 0.024" aluminum or 0.020" copper.
Allow 1" minimum clearance between rear edge of cutout and nearest
•
combustible surface above countertop.
Electrolux Major Appliances, N.A.
250 Bobby Jones Expressway
USA
• •
CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4
• •
E36EC75HSS 09/09
13"
35
max.
2"
cabinet
depth
3
Side inset / "
8
Approximate location
of junction box
22"
1 1 / "
8
max.
24"
4" x 8" opening to
route armored cable
Augusta, GA 30907 1-877 -4electrolux (1-877 -435-3287)
•
1-800-265-8352
•
36" min.
25 3 / "
4
7 / "
8
10"
7 1 / "
2
12"
35 3 / "
16
*Both cutout dimensions are critical to proper cooktop
installation. Due to variations in countertop materials
it is recommended to undercut finished dimension
(35-15/16") and adjust upon installation of cooktop.
Allow 7-1/2" minimum clearance from edge of cooktop to nearest
•
combustible wall on either side of unit.
It is recommended that drawers not be used beneath cooktop.
•
To reduce risk of fire when using overhead cabinetry, install vent hood
•
that projects horizontally a recommended minimum of 7" beyond bottom
of cabinets.
Electric Slide-In Cooktop model E36EC75HSS is NOT approved to be
•
used over any Electrolux ICON
Electric Slide-In Cooktop model E36EC75HSS (without optional
•
backsplash) is approved to be used in combination with an
Electrolux ICON ® 36" Downdraft Vent. (Refer to Slide-In
Cooktop / Downdraft Vent Countertop Preparation page on web for
detailed installation specifications.)
Note: For planning purposes only. Refer to Product Installation Guide
on the web at electroluxicon.com for detailed instructions.
Optional Accessories
When replacing an existing cooktop with countertop cutout deeper
•
than 7-1/4" and less than 8-1/2", order free Depth Adjustment Filler
Kit – (PN # 903051-9010).
9" Stainless Steel Backsplash – (PN # 903048-9010).
•
Black Knobs Kit – (PN # 903127-9010).
•
electroluxicon.com
•
electroluxicon.ca
•
© 2009 Electrolux Home Products, Inc.
30" min. for
unprotected cabinet
24" min. for
protected surface
18"
min.
3
7 / "
4
1
7 / " min. to nearest
2
combustible wall
(either side of unit)
3 / "
8
7
3
*35 / "
16
* 35 15 / "
16
® Single Wall Oven.
High standards of quality at Electrolux Home Products, Inc. mean we are
constantly working to improve our products. We reserve the right to change
specifications or discontinue models without notice.
1 / "
4
Printed in the U.S.A.