Table of Contents
Advertisement
Installation and connection
en
Fasten the other end of the drain hose with the remaining accessories,
5.
depending on the connection situation (A, B or C).
Caution!
Accumulated water can be drawn back into the dryer and may cause material
damage.
Check that the water drains away from the wash basin quickly. The drain must
not be sealed or blocked.
Caution!
Material damage due to leaks or draining water.
Secure the drain hose so that it cannot slip out.Do not kink the drain hose.
Ensure that a height difference of max. 100 cm and min. 80 cm between the
installation surface and the drain is maintained for drainage into a siphon.
Pull out the condensation container fully.
6.
Turn the condensation container 180° onto its underside and remove the
7.
stopper that is fitted.Turn the condensation container back over and insert the
stopper into the recess in the top of the condensation container.
14
Advertisement
Table of Contents
