Cocoon HE160821 Getting Started Manual

Getting Started Guide
1.

UNPACK

Unpack your Cocoon DJ Speaker with Party Lights and check that you have all the components:
1 x Cocoon DJ Speaker with Party Lights
1 x Remote Control
1 x Wireless Microphone
1 x 3.5mm Aux Cable
1 x Power Cable
After Sales Support 1300 663 907
www.winplus.com.au
2.

INSERT MICROPHONE BATTERIES

Remove the battery cover from the rear of your Wireless Microphone, then insert the
included 2x Activ Energy AA Batteries, taking note of correct polarity. Secure the battery
cover back in place.
3.

INSERT REMOTE BATTERIES

Remove the battery cover from the rear of your Remote Control, then insert the included
2x Activ Energy AAA Batteries, taking note of correct polarity. Secure the battery cover
back in place.
4.

CONNECT POWER CABLE

Connect the AC Power Cable to the rear of the unit, plug into a mains power point and
then switch the power point on.
2 x Activ Energy AA Batteries
2 x Activ Energy AAA Batteries
1 x Warranty Certificate
1 x Instruction Manual
1 x Getting Started Guide
HE160821
02/2016