Table of Contents
Advertisement
Quick Links
Model# FR01
Item# ET-F-017
ASSEMBLY INSTRUCTIONS AND SAFETY GUIDE
1008/16
Type of gas: Butane
Nominal heat input: 16.5 kW
Gas consumption: (G30)-1201 g/h
BE, BG, CY, CZ, DK, EE, FI, FR, GB, GR, HR, HU, IT, LT, LU, LV, MT, NL, NO, RO, SE, SI, SK, TR:
Cat. I
= Butane, Propane and their mixtures at 30mbar, Injector: 2.09mm
3B/P(30)
"Only nationally approved hose and regulator corresponding to the appliance category and pressure must
be used "
This manual is for: GB
PIN.: 1008CR2974
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Laminvale FR01
Summary of Contents for Laminvale FR01
- Page 1 Model# FR01 Item# ET-F-017 ASSEMBLY INSTRUCTIONS AND SAFETY GUIDE 1008/16 Type of gas: Butane Nominal heat input: 16.5 kW Gas consumption: (G30)-1201 g/h BE, BG, CY, CZ, DK, EE, FI, FR, GB, GR, HR, HU, IT, LT, LU, LV, MT, NL, NO, RO, SE, SI, SK, TR: Cat.
-
Page 2: Important Safety Instructions
ASSEMBLY AND USER INSTRUCTIONS Your new Fire Table #FR01 is made from the highest quality and eco-friendly materials, and produced under strict manufacturing controls. Please read the Instructions for assembly before commencing, and follow the instructions for use carefully. We congratulate you on your decision to buy this outdoor gas fire pit and wish you great fun when warming with it. - Page 3 14. Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. More frequent cleaning may be required as necessary. It is imperative that the control compartment, burners, and circulating air passageways of the appliance are kept clean.
-
Page 4: Specifications
SPECIFICATIONS The gas fire pit, with gas type I is designed to operate on Butane or Propane or their mixtures at 30mbar. 3B/P(30), Gas consumption, prefssures and injectors orifice sizes are listed in the below table. Appliance category Injector Orifice Nominal Heat Input (Hs) Gas Consumption (G30) 2.09 mm... - Page 5 Part List Description Q’TY Description Q’TY Lava rock (6 kgs) 1 pkg 14 Electrode Burner 15 Washer Thermocouple 16 Nut (M6) Regulator 17 Bolt (M6 x 10) Gas valve 18 Bolt (M6 x 25) Gas control knob 19 Bolt (M5 x 8) Pulse ignition System 20 Nut (M5) AAA battery...
- Page 6 pilot box lava rock Figure 1 3. Place the gas cylinder into the gas cylinder support, connect the regulator by screwing with the manifold inlet fitting counterclockwise to tighten, turn the manifold inlet fitting clockwise to loosen or remove, see Figure 2.
- Page 7 butterfly screw Figure 3 7. Cover the fire pit with the outdoor weather cover when not in use to protect it from the elements or when fire pit is cool COMPLETELY after the use, see Figure 4. weather cover Figure 4 BATTERY Make sure the control knob is in the “OFF”...
-
Page 8: Lighting Instructions
LEAK TEST To prevent fire or explosion hazard when testing for a leak: 1. Always perform the leak test as described below before lighting this appliance or each time the gas cylinder is connected for use. 2. Do not smoke or allow other sources of ignition in the area while conducting a leak test. 3. - Page 9 possible blockage include: (1). Gas odor with extreme yellow tipping of flame. (2). Fire pit does NOT reach the desired temperature. (3). Fire pit flame is excessively uneven. (4). Fire pit makes popping noises. (5). Spiders and insects can nest in burner or orifice. This dangerous condition can damage fire pit and render it unsafe for use.
-
Page 10: Warranty
For quality control purposes and verification, we reserve the right to request photographs of the damage item(s). The terms of this warranty are subject to change without notice. Produced on behalf of: Laminvale Ltd. Barkestone Lane, Bottesford, Nottingham, NG13 ODH, UK...
Need help?
Do you have a question about the FR01 and is the answer not in the manual?
Questions and answers