Table of Contents
Advertisement
Note:
1. In Windows 10, no specific driver installation is required.
2. In Windows 7, the following driver must be installed before plugging the evaluation
platform:
https://os.mbed.com/docs/mbed-os/v6.0/program-setup/windows-serial-driver.html
3. The composite device (WebUSB: CMSIS-DAP) installation is not required, as this
functionality is not used.
In this context, once the evaluation platform has been recognized, it should also appear
under Device and drivers as a ST IDB011VX mass storage device:
2.2 Firmware programming
Unzip BLE_SensorDemo_BlueMSapp_WB2072E00A.rar file
Method one
Step 1. Press and hold the [PUSH1] button.
Step 2. Copy and paste the "BLE_SensorDemo_BlueMSapp_WB2072E00A.bin" binary
image into the [ST IDB011V1] mass storage device.
Figure 3. ST IDB011VX mass storage device
Figure 4. BLE Sensor Demo file
Figure 5. ST IDB011VX mass storage device
©
Copyright
JORJIN TECHNOLOGIES INC. 2020
http://www.jorjin.com.tw
CONFIDENTIAL
Doc No: WB2072E00A-QSG-D01
Page 4
Advertisement
Table of Contents
