Related Manuals for Oeuf RHEA 1RH01
Summary of Contents for Oeuf RHEA 1RH01
- Page 1 RHEA CRIB Item # 1RH01, 1RH02 Oeuf LLC 119 8th Street, Suite 301 Brooklyn, NY 11215 USA (800) 691-8810 | www.oeufnyc.com Made in Latvia...
- Page 2 Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are missing, damaged or broken. Contact Oeuf LLC for replacement parts and instructional literature if needed. DO NOT substitute parts.
-
Page 3: Canadian Regulations
CANADIAN REGULATIONS AFTER CRIB HAS BEEN COMPLETELY ASSEMBLED, STORE INSTRUCTION SHEET IN THIS POUCH. • Do not use this crib if you cannot exactly follow the accompanying instructions. • Do not use this crib for a child who can climb out of it or who is taller than 90 cm. •... - Page 4 AUSTRALIAN STANDARDS COMPLIANCE WARNING: TO PREVENT FALLS THE MATTRESS BASE OF THIS COT SHOULD BE ADJUSTED TO THE LOWEST POSITION BEFORE THE CHILD CAN SIT UP RECOMMENDED MATTRESS SIZE: 690 MM WIDE X 1300 MM LONG X NO MORE THAN 120 MM THICK •FAILURE TO FOLLOW THESE WARNINGS AND THE ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
- Page 5 • Regularly check that all assembly fittings are always tightened properly and retighten as necessary. After Sales Service When you receive your Oeuf product, if you need assistance, spare parts or if you have any comments with respect to any aspect of the goods, please contact by email your local distributor.
- Page 9 Insert mattress support tabs (C) for appropriate mattress height. To avoid possible finger entrapment, insert safety screws (J) into the MEDIUM and HIGH mattress support holes when not in use. The lowest mattress position is the safest position. Use the lowest position when the child is able to sit up.
Need help?
Do you have a question about the RHEA 1RH01 and is the answer not in the manual?
Questions and answers