Hide thumbs Also See for E4 Series:

Advertisement

This Temporary Revision IM-TR-MDC-E4-487 is approved in conjunction with the
Design Change Advisory MDC-E4-487 and is valid in conjunction with the latest
revision of the Maintenance Manual (IM) until this Temporary Revision has been
incorporated into the IM.
The limitations and information contained herein either supplement or, in the case of
conflict, override those in the IM.
The technical information contained in this document has been approved under the
authority of DOA ref. EASA.21J.399.
Doc. Nr.
E4.02.01
Instruction:
-
Print this document on yellow paper (single-sided)
-
Insert this cover page as the first page of the IM
-
Insert the other pages of this Temporary Revision adjacent to or in front of the
corresponding IM pages
Issue Date: 14-Mar-2019
Installation Manual
E4 Series
TEMPORARY REVISION
IM-TR-MDC-E4-487
IM-TR-Air Intake System
Affected Section(s)
8.3.2
IM-TR – Air Intake System
E4.02.01
IM-TR-MDC-E4-487
Affected Page(s)
8-2a
COVERPAGE

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the E4 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Austro Engine E4 Series

  • Page 1 Installation Manual E4.02.01 IM-TR-MDC-E4-487 E4 Series TEMPORARY REVISION IM-TR-MDC-E4-487 IM-TR-Air Intake System This Temporary Revision IM-TR-MDC-E4-487 is approved in conjunction with the Design Change Advisory MDC-E4-487 and is valid in conjunction with the latest revision of the Maintenance Manual (IM) until this Temporary Revision has been incorporated into the IM.
  • Page 2 Installation Manual E4.02.01 IM-TR-MDC-E4-487 E4 Series 8.4.1 Requirements for the Hose System The following text is added after the caution: The hose system in the pressurized area must be designed to minimize the transmission of forces to the turbocharger as a result of air pressure.

This manual is also suitable for:

Im-tr-mdc-e4-487

Table of Contents