Table of Contents
Advertisement
FACTORY ODOR REMOVAL
Wash the interior of the cooler with a mild detergent and warm water. Leave
the door open and allow it to air dry thoroughly. If a "plastic" smell persists,
place a dish of baking soda in the unit or stuff the cooler with newspapers
overnight. When finished, let the unit run a full day to complete the airing out
process.
OPERATING INSTRUCTIONS
OPERATING ENVIRONMENT
It is recommended that the wine cooler be installed in an area where the
ambient temperature is between 50°- 80°F. If the ambient temperature is
above or below the recommended ranges, the unit's performance may be
affected, and extreme cold or hot conditions may cause the interior
temperature to fluctuate. This will prevent the optimal range of 50°- 60°F from
being reached. In addition, keep in mind that the temperature may fluctuate
depending on whether the interior light is on or off, and whether the bottles
are located on the upper, middle, or lower racks.
HOW TO USE THE BUTTONS ON THE DISPLAY PANEL
B
F
UTTON
UNCTIONS
Raise the desired
temperature.*
* The interior temperature can be adjusted in increments of 1 degree between
54° and 66°F.
:
Love Your Home
7
Lower the desired
temperature. *
Turn the light on
and off.
Advertisement
Table of Contents
