Mach Speed Technologies NF4-A9A Manual page 46

NF4-A9A / NF4 Ultra-A9A
Boot Up Floppy Seek
Enabling this option will test the floppy drives to determine if they have 40 or 80
tracks. Disabling this option reduces the time it takes to boot-up.
The Choices: Enabled (default), Disabled.
Virus Warning
This option allows you to choose the Virus Warning feature that is used to protect
the IDE Hard Disk boot sector. If this function is enabled and an attempt is made to
write to the boot sector, BIOS will display a warning message on the screen and
sound an alarm beep.
Disabled (default)
Enabled
Quick Power On Self Test
Enabling this option will cause an abridged version of the Power On Self-Test
(POST) to execute after you power up the computer.
Enabled (default)
Disabled
Boot Up NumLock Status
Selects the NumLock. State after power on.
On (default)
Off
Gate A20 Option
Select if chipset or keyboard controller should control Gate A20.
Normal
Fast (default)
Security Option
This option will enable only individuals with passwords to bring the system online
and/or to use the CMOS Setup Utility.
System A password is required for the system to boot and is also
required to accessthe Setup Utility.
Setup (default) A password is required to access the Setup Utility only.
This will only apply if passwords are set from the Setup main menu.
APIC MODE
Selecting Enabled enables APIC device mode reporting from the BIOS to the
operating system.
The Choices: Enabled (default), Disabled.
Note: If the CPU type is AMD 939 Dual Core, this item will be
always"Enabled".
Virus protection is disabled.
Virus protection is activated.
Enable quick POST.
Normal POST.
Numpad is number keys.
Numpad is arrow keys.
A pin in the keyboard controller controls GateA20.
Lets chipset control Gate A20.
11