Mach Speed Technologies NF4-A9A Manual page 39

NF4-A9A / NF4 Ultra-A9A
Power Management Setup
This submenu allows you to configure the power management features.
PnP/PCI Configurations
This submenu allows you to configure certain "Plug and Play" and PCI
options.
PC Health Status
This submenu allows you to monitor the hardware of your system.
Frequency/ Voltage Control
This submenu allows you to change CPU Vcore Voltage and CPU/PCI clock.
(However, this function is strongly recommended not to use.
properly change the voltage and clock may cause the CPU or M/B
damage!)
Load Optimized Defaults
This selection allows you to reload the BIOS when the system is having
problems particularly with the boot sequence.
factory settings optimized for this system. A confirmation message will be
displayed before defaults are set.
Set Supervisor Password
Setting the supervisor password will prohibit everyone except the supervisor
from making changes using the CMOS Setup Utility. You will be prompted
with to enter a password.
These configurations are
4
Not