■
Preventing the TV from falling over
It is recommended to secure the pedestal to a furniture
as shown to prevent the TV from falling over.
●
This information is designed to reduce the risk of
injuries caused by the TV falling over. However, no
measure can guarantee protection in all cases.
Attaching the fall-prevention parts
Band (1)
Screw (1)
Wood screw (1)
Removing the pedestal
Be sure to remove the pedestal in the following
procedures when you use the wall-hanging bracket or
repack the TV.
1 Remove the cable cover
2 Remove the cable cover
3 Remove the assembly screws
4 Pull out the pedestal from the TV.
10
English
F
G
E
.
.
from the TV.
Installing the wall-
hanging bracket
Choosing to wall mount the TV shall be done at the
owner's risk. Always use a qualified installer to perform
a TV wall bracket installation. Incorrect fitting may cause
equipment to fall, resulting in injury and product damage.
Any such damage will void your warranty.
Accessories (wall-hanging parts)
Spacer nut (2)
■
Prepareation
When changing to installation with pedestal, remove the
spacer nut.
●
To remove the spacer nut, use a spanner or the like.
A