Installing The Wall-Hanging Bracket - Panasonic GX880H Series Operating Instructions Manual

Hide thumbs Also See for GX880H Series:
Table of Contents

Advertisement

3
Removing the pedestal
Be sure to remove the pedestal in the following
procedures when you use the wall-hanging bracket or
repack the TV.
1 Remove the cover
.
2 Remove the assembly screws
3 Pull out the pedestal from the TV.
C
from the pedestal.
Installing the wall-
hanging bracket
Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.
Holes for wall-hanging bracket installation
Rear of the TV
600 mm
(View from the side)
Depth of screw
minimum: 11 mm
maximum: 30 mm
Diameter: M8
Screw for fixing the TV onto the
wall-hanging bracket (not supplied with
the TV)
Warning
Using other wall-hanging brackets, or installing a wall-
hanging bracket by yourself have the risk of personal
injury and product damage. In order to maintain the
unit's performance and safety, be absolutely sure to
ask your dealer or a licensed contractor to secure
the wall-hanging brackets. Any damage caused by
installing without a qualified installer will void your
warranty.
Carefully read the instructions accompanying optional
accessories, and be absolutely sure to take steps to
prevent the TV from falling off.
Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
product damage.
Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.
300 mm
English
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Th-75gx880h

Table of Contents