Advertisement
ZOMS2-LEGS-Z
Yard Master 2 Extension Legs
Quick Guide
Thank you for choosing the Extension Legs accessory for your Yard Master 2 portable projection screen!
Please read through this user guide before utilizing the accessory. Correct usage and maintenance will
ensure a long product life
Care & Use Instructions
◆After using the extension legs, disassemble and store them in a safe and secure location.
Note: Extension Legs will NOT fit in carrying bag supplied with the Yard Master 2 Series.
◆To avoid damage and injury, the screen and extension legs should only be operated by adults.
Product Description
Design: The aluminum frame is designed to be lightweight and easy to carry, assemble and disassemble.
Replacing the Yard Master 2 legs
To replace your current legs with the new extension legs on your assembled screen, please follow the
Disassembly steps on page 2. If the legs on your screen are already removed, proceed with the assembly
steps starting below. For full assembly instructions on your screen, please refer to the Yard Master 2
Series User Guide.
Assembly
1．After the initial assembly of the screen frame, insert
the extension legs into the openings located at the left
and right bottom sides of the folding frame. Secure them
by fastening the knob screw into the adjacent hole. Next,
screw the eyebolts into the openings located at the top of
Fig.1
the frame (Fig.1)
Rev. 121119-BR
www.elitescreens.com
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Elite Screens Yard Master 2
Summary of Contents for Elite Screens Yard Master 2
- Page 1 To replace your current legs with the new extension legs on your assembled screen, please follow the disassembly steps on page 2. If the legs on your screen are already removed, proceed with the assembly steps starting below. For full assembly instructions on your screen, please refer to the Yard Master 2 Series User Guide.
- Page 2 4. Lastly, make sure your screen is secure and stable. Make any adjustments if needed. The installation is now complete. Note: Refer to Yard Master 2 User Guide for additional steps on securing your screen. Disassembly 1. Remove ropes and stakes from the ground, if needed, then unlatch the hinged support bars on front side of each leg so that it is bent.
- Page 3 NOTE: □ All other accessories, except for extension legs, are supplied with the Yard Master 2 Series when purchased separately. □ See Yard Master 2 Series User Guide for full assembly instructions of the screen. For a local Elite Screens contact or Technical Support, please visit www.elitescreens.com...
Need help?
Do you have a question about the Yard Master 2 and is the answer not in the manual?
Questions and answers