Disconnecting The Ic Recorder From The Usb Ac Adaptor - Sony ICD-TX660 Help Manual

Help Guide
IC Recorder
ICD-TX660

Disconnecting the IC recorder from the USB AC adaptor

Be sure to follow the procedure below to disconnect the IC recorder, otherwise you may not be able to play the files
stored on your IC recorder due to data corruption.
If an activity, such as recording or playback, is in progress, press
1
(play/enter/stop) to stop the activity.
Disconnect the supplied USB Type-C cable from the USB AC adaptor, and then disconnect the USB AC
2
adaptor from the outlet.
Note
While recording is in progress (the operation indicator lights in red), while recording is paused (the operation indicator flashes in
red), or while data is being accessed (the operation indicator flashes in orange), observe the following to avoid data corruption:
Do not connect/disconnect the USB Type-C cable to/from the USB AC adaptor that is connected to an outlet.
Do not connect/disconnect the USB AC adaptor, which is connected to your IC recorder, to/from an outlet.
Related Topic
Using/Charging the IC recorder with the USB AC adaptor
5-025-099-11(1) Copyright 2021 Sony Corporation
32
(record/recording stop) or