During First Use; Turning On The Appliance And Setting The Thermostat - Baumatic BR17A Instruction Manual

During first use

o When you first switch on the appliance, the compressor will run
continuously for approximately 24 hours or until the refrigerator
reaches a cool enough temperature.
o During this period of time, you should try not to open the door
frequently or place a large amount of food in the appliance.
o If the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance with the thermostat or
connecting it to your mains supply.

Turning on the appliance and setting the thermostat

You switch on your appliance by connecting it to your mains supply
and setting the thermostat. The thermostat control knob is located on
the right hand side of the fridge.
o The thermostat automatically regulates the temperature inside of
the fridge, depending on what number you have turned the
thermostat control knob to:-
o Position <0> means that the appliance will not cool. However
the light will still function.
o Position <1> will give you a higher temperature inside of the
fridge.
o Position <7> will give you a lower temperature inside of the
fridge.
o Ideally the thermostat should be set to a position of between
<3> to <4>.
o Your refrigerator can maintain a temperature of
between 4 – 6 degrees centigrade.
10