Tvone ONErack Installation Manual
Hide thumbs
Also See for ONErack:
- Installation manual (22 pages) ,
- Planning/installation manual (16 pages)
Subscribe to Our Youtube Channel
Related Manuals for Tvone ONErack
Summary of Contents for Tvone ONErack
- Page 1 ONErack internal power supply patent pending Installation Guide V1.20 MNL-1RK-PSU V1.20 Oct 2016...
- Page 2 In this guide In the box Fitting the ONErack internal power supply Safety Contact us...
- Page 3 4 M3 screws (Note: if your module has only the lower tab, you only need 2 screws) 1 power lead, AC (appropriate for your region) 1 A3 template Tools Pozidriv® PZ1 crosshead screwdriver In the unlikely event that a component is missing or damaged, please contact tech.usa@tvone.com or tech.europe@tvone.com. MNL-1RK-PSU...
- Page 4 Fitting the ONErack internal power supply To avoid damaging your ONErack, build it in a clean, tidy area. This installation guide assumes you have already built a ONErack chassis. Read more about building a chassis in the installation guide for the ONErack chassis.
- Page 5 2. Slide the internal power supply into the groove in the guide rails. 3. Screw the internal power supply in place with M3 screws. 4. If you have both upper and lower tabs, use four screws. If you have the lower tab only, use two screws. 5.
- Page 6 The green LED on the front of the internal power supply lights Read more about installing modules in the installation guide for ONErack modules. The guide is available from the Support Documents tab at www.tvone.com/onerack...
- Page 7 Copyright © 2016 tvONE. All rights reserved.
- Page 8 See our full range of scalers and video processors at www.tvone.com...
Need help?
Do you have a question about the ONErack and is the answer not in the manual?
Questions and answers