Related Manuals for Ijinus LNU
Summary of Contents for Ijinus LNU
- Page 1 Installation Guide LNU : Battery powered ultrasonic level sensors Measurement of water heights...
-
Page 2: Table Of Contents
Seventh step : Pair devices ............................20 Eighth step : Data sending ............................20 Elements for good practice and installation examples ....................23 Document History ................................ 26 IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com... -
Page 3: Introduction
Three main ranges of measurements (depending on max distance to measure) LNU0300 LNU0600 LNU1001 Measure up to 3m Measure up to 6m Measure up to 10m External ultrasonic probe IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com... -
Page 4: Necessary Equipment (4 Configuration Examples)
It has internal logger and data can be retrieved on-site (by radio using the programming kit : Wiji). Ultrasonic sensor Single battery Ultrasonic sensor with connector Water sampler cable Overflow detector Fixation, either single or double metal plate IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com... -
Page 5: Permanent Installation Of A Unique Level Sensor (Continuous Monitoring Or Self-Monitoring Of Water Networks)
Wireless communication for remote data monitoring : 2G (for Sms), GPRS, 3G, Sigfox, NB-IoT (LTE-M 3GPP) Currently being integrated: 4G, 6LOWPAN IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com... -
Page 6: Quick Configuration With The Software Avelour
On the first connection with the sensor only the serial number will appear. The following connections you will see also the name of the installation site or another name that you define. IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com... -
Page 7: Second Step : Selection Of The Sensor To Configure, Eventually A Firmware Update Would Be Suggested
(so not if the metal plate of a man hole is closed). When the sensors is ready, Avelour will look like bellow : IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com... -
Page 8: Third Step : Configuration Of Measures Part
To the right of the measure period selector, 2 little icons allowing a deferred programming according to the time period and day of the week you can choose from. So far the sensor is not calibrated. IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com... - Page 9 (test in lab or if the sensor front flat water surface for example) A simple calibration would be possible. IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com...
- Page 10 A priority should be to move the sensor if possible otherwise go to the expert mode. (Only for experienced users). IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com...
-
Page 11: Calibration Of The Sensor Case N°1 (Ideal)
(typical case of 15°C under a man hole). IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com... -
Page 12: Calibration Of The Sensor Case N°2 (Classic Example Of A Manhole With An Invert)
The manipulation consists in increasing the value of the pink zone so it covers the different peaks for distances close to the probe, IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com... - Page 13 (and especially in presence of condensation) but also depends of the power setting of the sensor. IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com...
-
Page 14: Calibration Of The Sensor Case N°3 (Complex) - Expert Mode
You can log the temperature thank to the internal T probe used to compensate the level measurement with ultrasonic. For information, the sound speed in the air at 10°C is 337,6m/s. IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com... - Page 15 For your first or complex installations, we strongly advice to activate this functionality. IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com...
- Page 16 (here for 1500 mm) with the possibility to integrate mud height, this for a scale every 5 mm). Only the yellow cells have to be filled, conversion is done automatically. IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com...
- Page 17 Finishing of the programing : you have to validate with the “Program the device” button to send the configuration in the sensor memory : IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com...
-
Page 18: Fourth Step : Data Reading In Real Time
You Have two possibilities to read the data in real time : By pressing the “Test measure” button, or by selecting on the main menu the window “View broadcast measures” (Main menu > Windows > View broadcast measures) View broadcast measures: this option open a window showing the measures received by radio from Ijinus sensors and loggers nearby. IJINUS NA... -
Page 19: Fifth Step : Retrieve And See Locally Your Data By Radio
From The graph and/or list of data you find the tab “Export the measures” with the choice of different files format and style of reports, from date to date, by month, or simply all data. IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com... -
Page 20: Seventh Step : Pair Devices
Finally you should run a test by clicking the Launch button to check if the data are sent to our website if your account is created and the sensor already configured. IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com... - Page 21 - Set now your timezone in the System options menu: IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com...
- Page 22 The modem diagnostic button available on the modem configuration allows a better diagnostic of the GPRS / 3G reception by doing multiple measurements. IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com...
-
Page 23: Elements For Good Practice And Installation Examples
If possible it shouldn’t be any obstacle between the sensor and the water surface (if you can’t avoid it, please refer to the calibration chapter to mask it with a filter). IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com... - Page 24 Finally, below are some photos of sensors installed in different environments: Venturi type channels: Measurement in collectors: CSO, SSO applications: IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com...
- Page 25 Install in river: Positioning different type of antenna in manhole: Positioning of a Sigfox antenna Positioning of a Sigfox antenna 1 IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com...
-
Page 26: Document History
Document History Date Revision Writer(s) Changes 09/21/2016 M. Zug Creation 06/02/2017 2A01 D. MAHE Translation IJINUS NA - c/o ALTIOS USA, 10-34 44th Drive11101 Long Island City - United States - www.ijinus.com - sales@ijinus.com...