Page 15
English Our products are designed to meet the highest standards of quality, functionality and design. We hope you enjoy your new Braun Shaver. Read these instructions completely, they contain safety information. Keep them for future reference. Warning Your shaving system is provided with a special cord set, which has an integrated Safety Extra Low Voltage power sup- ply.
Page 16
Do not refi ll the cartridge and use only original Braun refi ll cartridges. Important Keep power supply, charging stand and Clean & Charge Station dry. Description Clean&Renew station Cleaning fl uid display Lift button for cartridge exchange Station-to-shaver contacts...
Page 17
The cleaning fl uid display will show how much fl uid is in the cartridge: up to 30 cleaning cycles available up to 7 cleaning cycles remaining new cartridge required Charging and cleaning the shaver Insert the shaver head down into the cleaning station.
Battery segments: During charging or when using the shaver, the respective battery segment will blink. When fully charged all 6 segments are shown. With decreasing charge the segments gradually disappear. Low charge indicator The low charge indicator provided with a red frame blinks to indicate that the battery is running low.
Page 19
When switching on next time, the last used setting will be activated. Tips for the perfect dry shave For best shaving results, Braun recommends you follow 3 simple steps: 1. Always shave before washing your face. 2. At all times, hold the shaver at right angles (90°) to your skin.
Page 20
The cleaning cartridge also contains lubricants, which may leave residual marks on the outer foil frame after cleaning. However, these marks can be removed easily by wiping gently with a cloth or soft tissue paper. Manual cleaning Rinsing the shaver head under running water is an alternative way to keep the shaver clean, especially when travelling: •...
While doing so, the replacement light blinks and goes off when the reset is complete. The manual reset can be done at any time. Accessories Available at your dealer or Braun Service Centres: • Foil & Cutter cassette 70S • Cleaning cartridge Clean&Renew CCR...
Trouble-Shooting Problem: Possible reason: Remedy: SHAVER Unpleasant 1. Shaver head is 1. When cleaning the shaver head smell from the cleaned with water. with water only use hot water shaver head. 2. Cleaning cartridge is and from time to time some in use for more than liquid soap (without abrasive 8 weeks.
Page 23
(e.g. shaver foil or cutter block) as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorised persons and if original Braun parts are not used.