Tennsco J1842A-N Assembly Instructions/Parts Manual

Tennsco J1842A-N Assembly Instructions/Parts Manual

Jumbo counter-height storage cabinet unassembled

Advertisement

ASSEMBLY INSTRUCTIONS & PARTS MANUAL
Jumbo Counter-Height Storage Cabinet
Unassembled Models J1842A-N & J2442A-N
Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury.
For safety, wear a pair of work gloves when assembling or performing any maintenance on products.
Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply
in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by persons not authorized by Seller, where goods are damaged during
shipment, or where the date stamps on the goods have been defaced, modified or removed. UNLESS CONSIDERED UNENFORCEABLE OR UNLAWFUL UNDER APPLICABLE LAW:
a.
ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXCLUDED:
b.
BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT OF THE GOODS AT SELLER'S OPTION, AND SHALL IN NO
EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the
goods to Seller for inspection on Seller's premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty
and are returned within the warranty period stated above.
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE

GENERAL SAFETY INFORMATION

LIMITED WARRANTY

LOAD CAPACITIES PER SHELF LEVEL
UNIT SIZE
48w x 18d
48w x 24d
Tennsco LLC., Dickson, TN 37056-1888 • (866) 446-8686
EVENLY DISTRIBUTED
WEIGHT CAPACITY
400 lbs.
400 lbs.
PK-2310918

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the J1842A-N and is the answer not in the manual?

Questions and answers

Summary of Contents for Tennsco J1842A-N

  • Page 1 LIMITED WARRANTY Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment, hereunder. This warranty shall not apply in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modification or repair by persons not authorized by Seller, where goods are damaged during shipment, or where the date stamps on the goods have been defaced, modified or removed.
  • Page 2 ASSEMBLY OF J1842A-N OR J2442A-N CABINET Tools Needed: A free ” nut driver is included with each Tennsco cabinet. Two people are recommended for assembly. Approximate assembly time: 20-30 minutes. The reference numbers used throughout this sheet refer to Attach the right side (Ref. No. 3) to the back in the same manner as you did in step 3, again making sure that the illustration on the back cover.
  • Page 3 Handle/Locking System Installation 8. Set the unit upright. Insert the second shelf at the desired Place the locking handle level. Be sure that the flange with the two holes should (Ref. No. 10) on the right face the front. hand door and fasten with two #8-32 X hex-head bolts and lock washers,...
  • Page 4 NOTE: Additional hardware may be included for replacement purposes. Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged. However, should your unit contain missing or damaged parts, please contact your purchase location.

This manual is also suitable for:

J2442a-n

Table of Contents