Bosch WQG233D1BY User Manual And Installation Instructions page 37

Fault
Creasing.
and programme ter-
minated.
The programme does
not start.
The length of the pro-
gramme changes dur-
ing the drying cycle.
Pumping noise.
Buzzing noise.
Cause and troubleshooting
The load is too large.
Observe the maximum load capacity of the
▶
→ "Programmes", Page 24.
The laundry lies in the drum for too long after drying.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Unsuitable programme for the type of fabric.
Set the suitable programme for the type of fabric.
▶
→ "Programmes", Page 24
Easy-Care fabrics are dried for too long.
→ "Changing the dryness level", Page 23.
▶
→ "Adjusting the dryness level", Page 23.
▶
Anti-Crease not activated.
Activate the Anti-Crease function.
▶
→ "Buttons", Page 21
Condensation tank filled.
→ "Emptying the condensation container", Page 31.
1.
→ "Inserting the condensation container", Page 31.
2.
→ "Starting the programme", Page 27.
3.
Foreign object is located in the base unit
→ "Opening the base unit", Page 32.
1.
Remove the foreign objects that are present.
2.
→ "Closing the base unit", Page 35.
3.
Childproof lock is activated.
→ "Deactivating the childproof lock", Page 32
▶
You have not pressed
Press ⁠ Start/Reload .
▶
No programme set.
→ "Setting a programme", Page 27.
1.
→ "Starting the programme", Page 27.
2.
The programme operation is optimised electronically.
This may change the programme duration.
Not a fault – no action required.
▶
Condensation pump active.
Not a fault – normal operating noise.
▶
Compressor ventilation active.
Not a fault – normal operating noise.
▶
Troubleshooting en
⁠ Start/Reload .
37