Arenaluci LED INGROUND User Manual

This instruction manual contains important
information about the installation and use of the
projector. Please read and follow these
instructions carefully.
The security of this device is guaranteed only
with the proper use of the following instructions,
therefore they must be kept carefully.
Never install the device in locations easily
accessible by people who ignore the existence of
this user's manual and safety instructions.
Disconnect the unit from any power supply before
attempting any operation in contact or inside the
unit, and when not in use.
Prior to connect the unit to the power supply,
check the output voltage fits the technical
requirements on the label.
Never let the power cord come into contact with
other cables.
Never touch the electrical contacts, either directly
with your fingers, or indirectly by means of sharp
or metal objects.
Make sure that cables cannot cause trip hazard.
Do not attempt to dismantle and modify the unit.
Due to the high technological level of this unit,
any service maintenance should be performed by
specialised operators. Please contact your Arena
Luci dealer for any operation.
Always ensure that the structure to which you are
attaching the unit is secure and is able to support
the weight of each unit.
Please note that as part of Arena Luci's ongoing commitment to continuous product development,
specifications are subject to change in the course of product improvement without notice. Arena Luci is not
responsible for damages resulting from improper or different use than expected.
LED INGROUND
Walk­over 230V ac LED inground

WARNINGS

Avoid installing the unit close to heat sources.
Never lean the power cord on hot unit surfaces.
Allowed to be mounted directly on inflammable
surfaces.
Do not install the luminaire on deformed or
damaged surfaces.
The lighting apparatus must be used only with its
protective shield.
Contact your Arena Luci dealer if the protective
shield is visibly damaged to the point at which its
effectiveness is diminished, for example by
becoming cracked or deeply scratched.
LED module is not replaceable.
Do not use any solvent based cleaning agents.
Use only a soft, dry anti­static cloth.
The installation of LED modules (including power
supplies) should be done according to current
technical rules and regulations. The installation
should be performed only by a qualified operator.
This luminaire is an outdoor IP67 device, but not
IP68 (underwater). Therefore the proper and
extended functioning will be related to the proper
installation.
To avoid infiltrations inside the inground box do
not open or install this luminaire during rainy
days or in high humidity conditions.
Avoid contact with either corrosive agents or
humidity and moisture on delicate elements:
damages from corrosion are not refunded as
component defects.
User's manual
FL0040
FL0042