Arena Luci LC5003 User Manual

Lighting controller for LED RGBW devices, with PWM and DMX output.
This instruction manual contains important
information about the installation and use of the
projector. Please read and follow these
instructions carefully.
The security of this device is guaranteed only
with the proper use of the following instructions,
therefore they must be kept carefully.
Disconnect the unit from any power supply before
attempting any operation in contact or inside the
unit, and when not in use.
Due to the high technological level of this unit,
any service maintenance should be performed by
specialised operators. Please contact your Arena
Luci dealer for any operation.
Do not attempt to dismantle and modify the unit.
Allowed to be mounted directly on inflammable
Please note that as part of Arena Luci s ongoing commitment to continuous product development,
specifications are subject to change in the course of product improvement without notice. Arena Luci is not
responsible for damages resulting from improper or different use than expected.
LC5003
User s Manual
WARNINGS
surfaces.
Do not allow contact with water or any other
fluids, or metallic objects (IP 20).
Do not install the projector in areas of high
humidity. The unit is intended only for indoor
purposes.
Always ensure that the structure to which you are
attaching the unit is secure and is able to support
the weight of each unit.
The installation of LED modules (including power
supplies) should be done according to current
technical rules and regulations. The installation
should be performed only by a qualified operator.
Prior to connect the unit to the mains supply,
check the output voltage fits the technical
requirements on the label.