Related Manuals for HCC Technology HCC-TL31
Summary of Contents for HCC Technology HCC-TL31
- Page 1 HCC-TL31Thermal Label Printer User’s Manual HCC-TL31 Thermal Label Printer User’s Manual VER 1.00...
-
Page 2: Table Of Contents
HCC-TL31Thermal Label Printer User’s Manual Content Precautions.................................1 Chapter One Printer Appearance and Model....................2 1.1 Printer Appearance...........................2 1.2 Model..............................3 Chapter 2 Performance Features........................3 2.1 Printing performance..........................3 2.2 Printing paper............................4 2.3 Printing characters..........................4 2.4 Physical parameters..........................4 2.5 Environmental parameters........................4 2.6 Other properties............................4 Chapter 3Methods of Use.......................... -
Page 3: Precautions
HCC-TL31Thermal Label Printer User’s Manual Precautions Before using the printer, please read this chapter carefully! Safety Precautions Do not touch the print head and its connecting parts to avoid burns or damage to the print head due ◆ to staticelectricity. If the printer emits smoke, peculiar smell or abnormal noise, the machine must be turned off ◆... -
Page 4: Chapter One Printer Appearance And Model
HCC-TL31Thermal Label Printer User’s Manual humidity of 10% to 90%. Statement This is a Class A product. In the living environment, this product may cause radio interference. In this case, the user may be required to take practical measures for its interference. Chapter One Printer Appearance and Model 1.1 Printer Appearance... -
Page 5: Model
HCC-TL31Thermal Label Printer User’s Manual HCC-TL31 Printer appearance figure 1.2 Model Model Name Description Printing Density HCC-TL31 8dots/mm, 576dots/line HCC-TL31BTDM USB,Blue Tooth HCC-TL31WF USB,WiFi Chapter 2 Performance Features 2.1 Printing performance Printing method: line thermal printing Printing paper width: 40mm(Min)---80mm(Max) -
Page 6: Printing Paper
Paper loading method: see 3.1.1 Printing Paper Roll Installation for details. Black mark positioning: yes (see 4.2 pre-printed black mark description for details). Print control commands: ESC/POS, TSC/TSPL. (See "HCC-TL31/301 Printer Command Programming Manual" for details). Power supply mode: DC24V±5%, 2A. -
Page 7: Chapter 3Methods Of Use
HCC-TL31Thermal Label Printer User’s Manual Chapter 3 Methods ofUse 3.1 Operation Steps 3.1.1 Paper Installation Open the cover and fill the paper: 1. Open the paper compartment cover and adjust the position of the paper limit block so that the paper can be put in smoothly. -
Page 8: Paper Position Requirements
HCC-TL31Thermal Label Printer User’s Manual Caution! ！ 1. Pay attention to the direction of loading paper, make the printing surface face to the print head. 2. Please don’t feed or draw the paper forwards or backwards with hands. 3. Keep clean of the print head, avoid to influence the printing quality. 3.1.2 Paper Position Requirements The folding paper (or paper roll) should be placed in the same straight line as the paper feeding path, to avoid skewing left and right causing the paper not to feed smoothly, which may affect the... -
Page 9: Rubber Roller Replacement
HCC-TL31Thermal Label Printer User’s Manual at a slight angle away from the plastic case. 3. Remove the ribbon cable, replace with a new print head assembly, keep the ribbon cable direction unchanged, and assemble it in reverse according to the above steps. 3.1.4 Rubber roller replacement 1. -
Page 10: Paper Feed (Manual Paper Feed)
HCC-TL31Thermal Label Printer User’s Manual Self-test prints out parameters in fellow order: manufacturer name, printer model, software version, interface type, default value of printer parameters, 96 characters in ASSIC code, default code page content (language setting is English) or Chinese character library name ( The language is set to Chinese) and the barcode type. -
Page 11: Factory Reset
HCC-TL31Thermal Label Printer User’s Manual detailed setup methods. To exit the parameter setting method, press the 【 PAUSE】 button and 【 FEED】 button simultaneously, then release the 【PAUSE】 button and the 【FEED】 button at the same time. The printer saves the set parameter values and exits the parameter setting mode to enter the normal working mode. -
Page 12: Usb Interface
HCC-TL31Thermal Label Printer User’s Manual Power socket and pin assignment 3.3.2 USB interface The standard configuration of the TL24 printer is equipped with a standard USB printer cable D-port data cable for connecting the printer to the main device. The printer's USB belongs to the slave device type (DEVICE);... -
Page 13: Indicator Light, Buzzer And Button Operation
3.4 Indicator light, buzzer and button operation Th HCC-TL31 printer has one button, one built-in buzzer and one Red and green two- color indicator. 【FEED】is the paper feed button. You can use the print command to enable or disable the button switch function. -
Page 14: Cleaning And Maintenance
HCC-TL31Thermal Label Printer User’s Manual The black mark pre-print regulations are as below: Printing Position:As the picture above, the black mark should be printed on the right edge of the side of words Width range: width≥7mm Height range: 4mm≤height≤6mm Reflectivity of infrared ray : <10% (infrared ray reflectivity of other parts of the black mark paper is>65%) HPS: It is the distance between edges of black mark and edges of print beginning position. - Page 15 HCC-TL31Thermal Label Printer User’s Manual...
- Page 16 HCC-TL31Thermal Label Printer User’s Manual Appendix A Setting description: Use [Paper Hatch Cover] to select the setting item. Each time you press [Paper Hatch Cover], the setting item changes to the next item, and the current setting value of the item is displayed.
- Page 17 HCC-TL31Thermal Label Printer User’s Manual Printing direction setting: Black mark onsetting: Printer modesetting: Reprint setting for out of paper: Same as 【Black mark on setting】 Printing rapid setting: Speed setting item:...
Need help?
Do you have a question about the HCC-TL31 and is the answer not in the manual?
Questions and answers