Page 2
ENGLISH ......................1-7 Read The Instruction manual: When this symbol is marked on a product, it means that the instruction manual must be read. In order to avoid overheating, do not cover the heater. PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE. Children of less than 3 years should be kept away unless continuously supervised.
Page 4
Safety Information IMPORTANT: Read and understand all of the safety information and instructions in this manual before operating your heater. RISK OF EXPLOSION! Do Not operate this heater where there are harmful, DANGER explosive or flammable gasses, fumes or hazardous substances. WARNING RISK OF FIRE! Do Not operate this heater near combustible materials.
Page 5
Operation Assembly Thermostat Instructions 1. Align holes in the upper housing with the 2 – At first, set the thermostat to “+” and let the holes in the handle. heater operate with full power input. When 2. Insert screws and tighten firmly. the room temperature reaches the required value, turn the thermostat to the left until it Operation...
Page 6
Plug Replacement RISK OF ELECTRIC SHOCK! DISCONNECT FROM POWER BEFORE MAINTENANCE. WARNING NOTE: This section only applies to heaters sold or used in Great Britain. This appliance is supplied with a BS1363 3 pin plug fitted NOTE: If a moulded plug is fitted and has to be removed with a fuse.
Need help?
Do you have a question about the PT-02-230-E and is the answer not in the manual?
Questions and answers