Network Settings Network; Changing Wan Port Configurations; Configuring Wide Area Network (Wan) Interface Settings - QNAP QHora-301W User Manual

7. Network Settings
Network

Changing WAN Port Configurations

1. Open QuRouter.
2. Go to Network > WAN & LAN Settings .
3. Select the WAN port configuration from the following options based on your network requirements.
Setting
WAN 1 GbE port 1
WAN 10 GbE port 1
WAN 1 GbE port 1 and 1
GbE port 2
A confirmation message appears.
4. Click Apply.
Important
Updating the WAN port configuration automatically deletes all the port forwarding rules.
QuRouter updates the WAN port configuration.

Configuring Wide Area Network (WAN) Interface Settings

1. Open QuRouter
2. Go to Network > WAN & LAN Settings .
3. Identify a WAN interface.
4.
Click .
The port configuration window appears.
5. Configure the IPv4 settings.
a. Select the WAN interface setting from the following options.
Setting
DHCP Obtain IP address settings automatically via DHCP
Select to build a high-speed 10 GbE intranet by connecting 2 x 10 GbE ports
to 10 GbE devices in a LAN environment and connecting the 1 GbE port 1
interface to the WAN interface.
Select to configure a high-speed interoffice VPN network by connecting the 10
GbE port 1 interface to the WAN interface and connecting the 10 GbE port 2
interface to a server or storage device in a LAN environment.
Select to configure an SD-WAN environment (QuWAN) by connecting 2 x 1
GbE ports to the WAN interface and connecting 2 x 10 GbE ports to server or
storage devices in a LAN environment.
User Action
Description
QHora-301W User Guide
Network Settings 31