SAFETY INSTRUCTIONS • Read the manual before first use and keep it for future reference. • For better experience wipe the electrodes with wet towel before use. • Do not immerse the device in water, it is not waterproof. • If you want to adjust the position of the device, turn it off first.
PACKAGE Massage device Remote controller USB cable Manual Note: Moisten the electrodes before use. Place the device on your neck and make sure the electrodes are placed on your skin. Hold down the mode button for 3 seconds to start. Press the mode button to change mode.
CHARGING • If the battery is low, the indicator will light red and flash. • During charging, the indicator is red and flashing. The indicator will light white and flash when the battery is charged. • Charging time: 2 - 3 hours. •...
Problem Cause Solution Unable to start Low battery Recharge the product cable Connect the cable properly Cannot charge / indicator connected properly does not display information Wrong USB type Use the correct USB cable The remote controller does The battery is weak Replace the battery not work The electrodes do not touch...
ENVIRONMENT PROTECTION After the product lifespan expired or if the possible repairing is uneconomic, dispose it according to the local laws and environmentally friendly in the nearest scrapyard. By proper disposal you will protect the environment and natural sources. Moreover, you can help protect human health.
Need help?
Do you have a question about the 23092 and is the answer not in the manual?
Questions and answers