Codabar - RAL RA1001 Series User Manual

Codabar

Read:
Format
Start Data digits (variable)
Check digit verification: The check digit is made as the sum module 16 of the numerical values of all data
digits.
Check digit transmission: By setting Enable, check digit will be transmitted.
Max./Min. code length: Refer to Max./Min. code length of Code 39.
Code ID setting: Refer to Code ID setting of UPC-A.
Insertion group selection: Refer to Insertion group selection of UPC-A.
Start/End type: Codabar has four pairs of Start/End pattern; you may select one pair to match your
application.
Start/End transmission: Refer to Start/End transmission of Code 39.
Start/End character equality: By setting Enable, the start and end character of a Codabar barcode must
be the same.
Check digit (optional)
Option bar code
Read
Check digit verification
Check digit transmission
Max. code length
Min. code length
Code ID setting
Insert group selection
Start/End type
Start/End transmission
Start/End character equality
End
Option Alpha. entry
Disable 00
Enable 01*
Disable 00*
Enable 01
Disable 00*
Enable 01
00-99 00-99
00*
00-99 00-99
00*
00-FF 00-FF
16
(ASCII) <N>*
00-66 00-66
00*
ABCD/ABCD 00*
abcd/abcd 01
ABCD/TN⋆E 02
abcd/tn⋆e 03
Disable 00*
Enable 01
Disable 00*
Enable 01
27
SETUP
16
END