Upc-A - RAL RA1001 Series User Manual

UPC-A

Read: Format
Leading zero
Check digit verification: The check digit is optional.
Check digit trans.: By setting Enable, check digit will be transmitted.
Code ID setting: Code ID is a one-or-two-character string used to represent the symbol upon a
succeeding reading. If you want application to transmit Code ID, you must set Code ID transmission to
be enabled. Refer to the chapter of String transmission.
Insertion group selection: Refer to Global insertion group selection of the chapter of Hand-held scan &
some global settings.
Supplement digits: The Supplement digits barcode is the supplemental 2 or 5 characters.
Format
Leading zero
Truncation/Expansion:
Truncate leading zeros- The leading "0" digits of UPC-A data characters can be truncated when the
feature is enabled.
Expand to EAN-13- It extends to 13-digits with a "0" leading digit when the feature is enabled.
Data digits (11 digits)
Data digits (11 digits)
Option bar code
Read
Check digit verification
Check digit trans.
Code ID setting
Insert group selection
Supplement digits
Truncation/Expansion
Reserved
Check digit
Check digit
Option
Disable
Enable
Disable
Enable
Disable
Enable
00-FF
16
(ASCII)
00-66
None
2 digits
5 digits
2 or 5 digits
None
Truncate leading zeros
Expand to EAN-13
18
Supplement digits 2 or 5
SETUP
Alpha. entry
00
01*
00
01*
00
01*
00-FF
16
<A>*
00-66
00*
00*
01
02
03
00*
01
02
END