Cadi SmartNODE SMN-823W User Manual page 7

User button SLEEP->WAKE
Explanation: Activation Count (soap level) will be maintained until the user physically initiates a
WAKE->SLEEP->WAKE sequence using the User button. Or else, the Activation Count remains.
Action
Reset button pressed
Explanation: Reset button is only accessible when changing the battery. By changing the battery,
followed by pressing the Reset button, the tag resets the Tx Count and Battery level.
Initialize Activation Count
START
WAKE mode
User button
>5sec?
Y
Save Activation
Count
N
END
Logic
Initialize Tx count, Battery Level
Used to initialize the soap usage
level to 0 when doing a soap
refill
SLEEP mode
User button
>5sec?
Y
Reset Activation
Count
N
Description
Used to initialize parameters
when a fresh battery is installed
7