Mitsubishi PD-4225 Owner's Manual page 46

T roubleshooting Checklist continued
T roubleshooting Checklist continued
No output from one of
the speakers
Unusual sound from
inside the TV
Lines or streaks
in picture
Poor stereo sound
Auto programming
doesn't stop
Picture moves
intermittently around
the screen
46 Plasma TV
• Adjust in the
BALANCE SOUND
• A change in ambient humidity or temperature may result in an unusual noise
when the TV is turned on or off and does not indicate a fault with the TV.
• Check antenna (Change the direction of the antenna).
• Check the kind of input signal and select
button.
• Press the ENTER button again.
• Is ORBITER ON? Default setting for ORBITER is ON. In this mode, picture
moves intermittently around the screen. See page 34 to shut off ORBITER.
menu. (Refer to p.31)
, or
Mono Stereo SAP
with the
MTS